Sanitary Sewer Pump Station E Rehabilitation

1. Plug In-fluent pipe at Wet Well; 2. By-pass Installation; 3. Remove and dispose of existing discharge pipe, including fittings (e.g. 8x10” eccentric reducers, 10"- 90 degree DI elbows); 4. Remove existing pump’s bases. Pumps removed are to be provided to the City; 5. Repair and level Wet Well floor with Five Star DP Epoxy Grout; Install new 18" x 24" x 1/2" SS 316 Base Pump Plate (Provided by the City) anchored to the floor with SS 316 Bolts, Nuts and Square washers; 6. Install new pumps bases (Provided by the City) with SS bolts, nuts, washers; 7. Install new 10-inch C-900 PVC-FM discharge pipes; 8. Install new fittings (e.g. new 6x10” reducers, new 10"-90 degree DI elbows) and Megaflanges 9. Restrained Flange Adapters with Stainless steel 316 Bolts; 10. Upon completion of the above task, City personnel shall perform new pumps installation and startup. Upon completion of this task by the City, the Bidder shall perform remaining tasks listed below.

Division 03 -	Concrete.
Division 04 -	Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection.
Division 08 -	Openings.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Toilet, Bath, and Laundry Accessories, Fire Protection Specialties, Fire Extinguishers, Storage Specialties.
Division 11 -	Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork.
Division 32 -	Exterior Improvements, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains.
Division 40 -	Process Integration, Water Process Piping.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.