Refurbish and Upgrade the Unit 2 Pump Station

Includes but is not limited to: remove and refurbish three (3) existing axial flow pumps, remove existing diesel power units, install new 1,200 amp service, install new 200 HP electric motors and all ancillary equipment associated with new motors, re-install refurbished pumps and conduct start-up. Work shall include all electrical and mechanical work necessary to make the system operational. The District is coordinating with Duke Energy to install a new transformer within 50-feet of the south side of the building. to provide electrical design drawings, electrical diagrams and electrical load calculations for all electrical work to include but not limited to: transformer to a new disconnect, from disconnect to new control panel and from the control panel to the new electric motors, ancillary lighting and receptacles.

Lift and Pump Stations, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.