Similar Projects
| Reported | 05/01/2019 12:00 AM |
| Project Title | 73--NEW-Kitchen Turnkey for Temple/Waco (VA-19-00049694) |
| Physical Address | View project details and contacts |
| City, State (County) | Temple, TX 76502 (Bell County) |
| Category(s) | Single Trades |
| Sub-Category(s) | Equipment |
| Contracting Method | Competitive Bids. |
| Project Status | Accepting Letters of Interest |
| Bids Due | View project details and contacts |
| Estimated Value | |
| Plans Available from | Federal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | TEMPLE BLDG 163 DISH MACHINE W/SCRAPPING STATION Turnkey job that will require removal and demolition of existing equipment and all installation and hook-ups of new equipment, including any repairs needed to floor or walls as a result of the demolition/installation. It is turnkey but not limited to connection of all utility lines, breaker, and piping associated with the new machine and scrapping station. LOW-ENERGY FLIGHT TYPE DISH MACHINE WITH STEAM AND BLOWER DYER a. 1-year parts and labor warranty b. Water usage 58 gallons per hour c. digital controls with machine diagnostics d. low temperature alert e. start and stop switch at both ends f. doors open indicator g. drain open indicator h. 3 1/2 H. P. prewash, power wash, and power rinse pump motors i. Capless auto clean wash arms j. removable stainless-steel scrap pans and baskets k. 30" wide conveyor belt l. dual rinse m. auto clean n. auto delime o. front and rear panels p. variable speed conveyor q. steam booster heater r. steam blower dryer s. right to left operation with right side being nearest existing pulper. t. automatic soil removal system u. 480/60/3 phase v. Must be installed a minimum of 24" from wall. FABRICATED SOILED DISHTABLE APPROXIMATELY 10 FT-11FT LONG AND 3 AND 1/4 FT WIDE APPROXIMATELY 3FT-4FT LONG AND 2FT-2 AND 1/2FT WIDE Scrapping Station to consist of a soiled dish table (approximately 10ft-11ft long and 3ft and 1/4ft - 3ft and 3/4ft wide) with dish drain table (approximately 3ft-4ft long and 2ft to 2ft and 1/2ft wide) connected to the soiled dish table which will serve the purpose of transferring full racks which hold mugs, cups, bowls, etc. to be within 8-12" of the load end of the dish machine, magnetic silver saver, stub rollers, 2 stationary sinks (one by dish machine and one in front of the middle of scrapping station), and 2 scrapping/pre-rinse spray nozzles, overhead rack and storage shelf, gravity roller conveyor, drainboard table located by dish machine to be matched up against and connected to existing pulper a. Soiled dish table with dish drain table connected b. Approximately 1 and 1/2ft - 1 and 3/4ft wide and the other Soiled dish table divided in two sections (section closest to the wall Approximately 1 and 1/2ft - 1 and 3/4ft wide and the other approximately 1 and 1/3ft-1 and 1/2ft wide) with the section farthest from wall connected to water source leading to pulper c. 2 stationary sinks, one by dish machine and one in front of scrapping table d. Two pre-rinse spray nozzles e. Gravity roller-conveyor f. Scrapping table to be 8" to 12" of dish machine loading end and to be matched up and connected to existing pulper on the other end g. Magnetic silver saver h. Overhead rack and storage shelf to match the length of the soiled dish table i. Drain table piece to be approximately half the width of the soiled dish table j. Stainless steel construction k. Drain table may consist of solid stainless steel or gravity rollers. ADDITIONAL ITEMS a. Upgrade the water softening system and piping to support the dish machine. b. Repair any damage to floors, walls, and ceilings that occurs during installation. c. Must have a commercial kitchen equipment business that has operated continuously for the past five (5) years and have accomplished similar work in the removal and installation of dish machine and scrapping station units for a minimum of three (3) years. | ||
| Details |
|
||
| Bidder's List | View project details and contacts | ||
| Prospective Bidders | View project details and contacts | ||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
