Westside Pumping Plant Relocation, Encinal Regulator Installation, and Encinal Reservoir and Pumping Plant Demolition

Work includes the following: 1. Construction of an above-ground concrete masonry pumping plant structure with prefabricated truss roof approximately 30 ft x 20 ft x 18 ft which includes a new double- lift 0.6 million gallon per day (MGD) Westside Pumping Plant and new Encinal Regulator; furnishing and installing two 60-HP vertical turbine pumps and motors with related piping; furnishing and installing two 6" regulator valves; furnishing and installing a 300 gallon surge tank; furnishing and installing an overhead bridge crane; construction of retaining walls, driveways, fencing, gates, landscaping and other site improvements, and performing related required work. 2. Removing from service 530 feet of 8" Mortar Lined and Plastic Coated Steel (ML&PCS) pipe and 330 feet of 6" Cast Iron (CI) pipe and all appurtenances including hydrants and blowoffs; furnishing and installing approximately 20 feet of 6" ML&PCS pipe, 220 feet of 8" ML&PCS pipe, and 675 feet of 12" ML&PCS pipe, including all appurtenances and fittings; modifying portable pump connections including installation of new hydrant and manhole on Madera Lane, and performing related required work. 3. Demolition of the existing Westside and Encinal Pumping Plants and structures and all associated pumps, motors, electrical components, and associated piping; demolition of the existing Encinal Reservoir and all the associated components and piping; and demolition of the existing concrete floor slab and tank footing and associated piping of the old Orinda Reservoir. Within District property boundaries, remove decommissioned pipes from the ground entirely and backfill using Class II aggregate base, and cap abandoned pipelines within the public right-of-way. Performance and payment bonds for not less than 100 percent of the contract price are required. All work covered by the contract including approval of final operations & maintenance manuals, as-built drawings, and all testing shall be completed within one-thousand two-hundred sixty (1,260) calendar days after the Notice to Proceed.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.