Similar Projects
Reported | 09/11/2020 12:00 AM |
Project Title | Escambia County Road Prison Freezer Replacement |
Physical Address | View project details and contacts |
City, State (County) | Cantonment, FL 32533 (Escambia County) |
Category(s) | Single Trades |
Sub-Category(s) | Equipment |
Contracting Method | Competitive Bids. |
Project Status | Request for Quotations |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | County Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Replacement of existing 20'-0"x20'-0"x8'-0" food storage freezer at the Escambia County Road Prison facility. 1. NSF Approved walk-in freezer with the exterior dimensions of 20'-0"x20'-0"x8'-0, 4" thick extruded polystyrene, 26ga stucco embossed galvalume exterior, 26ga stucco embossed galvalume interior. 2. Floor- 20'-0"x20'-0", wood reinforced, extruded insulation, 26ga stucco embossed galvalume exterior, 22ga stainless steel interior. Floor does not need to be rated for forklift, pallet jack, or hard wheeled carts. 3. Door- 1ea 34-inch X 76-inch, low temperature outside, with floor, commercial grade door handle, adjustable spring loaded hinges, door closer, drip cap and screws. Door is to be positioned right hinge centered on front length wall. LED light and LED thermometer to be installed at door. Door shall also include 1ea 1/8" interior and exterior kick plate 34" wide, 32" high to include exterior door frame legs, locking bar with inside release for 34" door. 4. Rain Roof- Single membrane polyester polyvinyl chloride roof system, white material, with all necessary connectors and sealants to completely cover freezer roof 5. Freezer will include all Florida Wind Code certifications and engineering documents, and required hardware needed for outdoor installations. 6. Pressure relief must be factory installed 7. Strip curtain for low temperature operation of 40-inch X 84 inch 8. Interior lighting must be at least 4ea four-foot LED fixtures approved for low temperature operations with secure fasteners to prevent removal without specific tool. |
||||
Details |
|
||||
Bidder's List | View project details and contacts | ||||
Prospective Bidders | View project details and contacts | ||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |