Freshwater Boat Ramp Improvements at Olney Pond-Lincoln Woods State Park

Include, but not necessarily to be limited to furnishing all labor, materials and equipment necessary to perform the following: a. Install all sediment and erosion controls shown in the drawings. b. Install all necessary water control structures including cofferdams, pumps, and sediment control measures. c. Remove and properly dispose of the existing concrete boat ramps. Remove all necessary underwater sediment at boat ramp toe. Clear and grub as necessary. d. Install cast-in-place concrete abutment and backfill. e. Install boat ramp base and all precast boat ramp components. f. Construct and install timber floating dock. g. Furnish and install ADA-compliant kayak launch system. h. Furnish and install ADA-compliant asphalt walkway and parking area. i. Improve gravel parking lot as shown in the drawings.

Division 03 -	Concrete, Cast-in-Place Concrete.
Division 31 -	Earthwork, Excavation and Fill, Fill, Backfill, Erosion and Sedimentation Controls, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways.
Division 33 -	Utilities, Storm Drainage Utilities, Ponds and Reservoirs.
Division 35 -	Waterway and Marine Construction, Common Work Results for Waterway and Marine Construction, Waterway and Marine Construction and Equipment, Shoreline Protection, Waterway Construction and Equipment, Marine Construction and Equipment.
Division 41 -	Material Processing and Handling Equipment.