Afton State Park - BR01361 Bridge Rehabilitation

A. The work will be done under one prime contract that includes: General, Mechanical, and Electrical construction. B. The following summary is a general guide to the scope of work. It should not be construed as a detailed list of work included in the contract. 1. Remove 330 SY bituminous surface on approach trail and roadway. 2. Remove 295 SY bituminous wearing surface on timber bridge deck. 3. Remove and replace 84 LF of timber bridge railing on each side of bridge. 4. Remove and replace 235 LF of guard railing horizontal members. 5. Excavate behind each abutment and replace with 118 CY of select granular borrow and 22 CY class 5 aggregate base. 6. Furnish and install bituminous surface on approach trail (96 SY) and bituminous surface on approach roadway (234 SY). 7. Furnish and install 234 SY of bituminous surface on approach roadway. 8. Complete associated turf establishment and final site stabilization.

Bridge, Renovation.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.