Abandoned Mine Land Division (AML) Project 16 O, Phase 8, East Spoils and McIntosh Pit Final Grading Project

Bidders must register at Wyoming State Construction Portal to be able to download the Bid Package and to be able to submit bids. If you have not yet registered on the Wyoming State Construction Portal, and are interested in this bid, register immediately to avoid last-minute processing delays. Activation of your registration may take up to 24 hours. Only bids submitted electronically through Wyoming State Construction Public Purchase shall be accepted. Incomplete submittals shall be rejected. Each bid is required to have a bid deposit in the amount of ten percent (10%) of the total bid. The Bid Bond may be in the form of an electronic bid bond with Surety 2000, may be a scanned and uploaded copy of an original Bid Bond certificate, or may be submitted in the form of an original paper document. Acceptable paper originals include a cashier's check, or certified check drawn on a reliable bank and made payable to the State of Wyoming (no personal checks will be accepted), in the form of an original bid bond, (copy, fax, email, or upload of checks will not be accepted). A Bid Bond is retained ONLY if the bidder should be awarded the contract, and will be retained until a 100% Performance and Payment Bond is provided. If paper documents are used, the Bid Bond must be in possession of Wyoming State Construction Department prior to the Bid Opening. If the Successful Bidder is awarded the proposed contract and fails to enter into a contract with AML, then the Bid Bond or check in the sum of ten percent (10%) of any bid shall be forfeited to the State of Wyoming as liquidated damages. The Successful Bidder must furnish Performance and Payment bonds guaranteeing the faithful performance of the contract and the payment of labor and materials thereunder. Said bonds are to be in the sum of one hundred percent (100%) of the Contract Price and in substance, form, and execution as shall be approved by the State of Wyoming, Attorney General's Office. The State will reject bids from any bidder who has not signed the attendance sheet by the start time specified for the meeting, or who departs from the meeting before the meeting is declared adjourned by the Engineer conducting the meeting. Bidders must also sign out on the attendance sheet after the applicable on-site visit. The purpose of the tour(s) is to familiarize all bidders with the various locations and aspects of the Work and to allow prospective bidders to ask questions concerning the Work. The Bidder's Tour, however, does not relieve bidders from the responsibility of familiarizing and informing themselves of the extent and character of the Work as required by the Contract Documents. If unforeseen circumstances force a postponement of the Bid Tour, the Engineer will notify plan-holders of a new date and time. To ensure that Bidder is informed of postponement, Bidder should ensure that they are identified as a Plan-Holder on the Wyoming State Construction Portal site. Last Day for Questions - Tuesday, January 31, 2023 / 5pm QUALIFICATIONS OF BIDDERS: Each bidder must be prequalified by the Wyoming Department of Transportation for GRADING, with a minimum prequalification rating of $1,000,000.00 and to have attended the Bidder's Tour, before receiving an official copy of the Appendix D, Bid Proposal form from the Engineer for the AML Project 16 O, Phase 8, East Spoils and McIntosh Pit Final Grading Project. Bidders must go to website and download a copy of the Bid Package, including the Plans and Specifications, or they will not be able to acknowledge receipt or be able to upload their completed Appendix D - Bid Proposal and verification of the Bid Bond. To be eligible for acceptance the completed Appendix D - Bid Proposal must be uploaded into the Bid section of Wyoming State Construction Public Purchase and the Bid Bond information must be uploaded into the Bond section of Wyoming State Construction Public Purchase. No other form of submittal is accepted. For any questions about this project, please contact: BRS, Inc. Carl Warren, P.E., P.G. 1130 Major Avenue, Riverton, WY 82501 Phone/Fax/Cell: 307-857-3079 / 307-857-3080 / 307-709-0078 Email: brs@brsengineering.com

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Entrances, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Acoustical Ceilings, Flooring, Carpeting, Acoustic Treatment, Painting.
Division 12 -	Furnishings.
Division 21 -	Fire Suppression, Water-Based Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Fences and Gates, Irrigation, Planting.
Division 33 -	Utilities.