Grease, Sand, and Grit Trap Treatment, Collection and Disposal Services

Pump out all grease and residue from trap. Removal of all liquid and solid waste. Remove waste build-up and trap or pit walls and all associated equipment within the pit. Clear obstructions inlet/outlet pipes within the pits/traps to ensure unrestricted flow. Scraping down side walls. Scrape all side of tank. Clean all sediments at the bottom of the tank and remove any debris at the bottom of the pit. Pressure wash tank to remove all remaining residue. Flush down with water and pump out remaining residue as required by configuration of the grease trap. Record actual gallons pumped. Residual or recharge water must be higher than lower inlets. Cleaning the separator trough where installed. Collect all waste in the disposal tank and dispose, as applicable. Deodorizing area surround tank to help prevent odors. Suctioning hose used shall be capable of reaching the bottom of the compartment being suctioned at all four corners of that compartment. Skimming in lieu of complete cleaning will not be acceptable.

Division 41 -

Material Processing and Handling Equipment.