University of North Carolina at Charlotte Popp Martin Student Dining Renovations

The scope of this project includes, but is not limited to, the following: renovation of an educational dining facility. As of September 26, 2022, a construction manager has been selected for this project. A firm construction timeline for this project has not yet been released. The Whiting-Turner Contracting Company, Construction Manager, will accept sealed bids for UNCC Popp Martin Student Dining Renovation located on the campus of The University of North Carolina at Charlotte. Re-Bid Packages Include: 02A Demolition 06A Millwork and Custom Wood Dowels/Ceilings 07A Roofing 08A Doors, Frames, and Hardware 09D Painting and Wallcoverings 10B Operable Partition 21A Fire Protection 22A Plumbing 23A Mechanical All Pre-Bid RFIs were previously due to Whiting-Turner NLT Thursday September 8th, 2022 at 5:00 PM EST. For the Bid Opening (29 th ), parking will be available at the FOPS building and vendors need to provide the following information via email only, to Amanda Caudle, afelock@uncc.edu , subject: Visitor Parking Permits: 1. Vehicle Type 2. State vehicle is registered in 3. License Tag # 4. Year 5. Make of Vehicle 6. Style 7. Color 8. Name of vehicle owner 9. Email address Pre-Qualified bidders will be provided a complete set of plans, specifications, and bid manual electronically. Bid security in the amount of 10% of the bid amount shall be submitted with select bids and as required per specific bid package (as needed, required form will be shared by Whiting-Turner as part of bid package). The bid security shall be in the form of a bid bond, a cashier's check, or a certified check on some bank or trust company insured by the Federal Deposit Insurance Corporation made payable to The Whiting-Turner Contracting Company. The apparent low responsible, responsive bidder shall have their bid security held by Whiting-Turner until the Trade Contractor agreement is executed and all required documentation and materials are sent forth and approved by Whiting-Turner. All requested documentation and materials must be sent forth to Whiting-Turner in not less than 10 days from acceptance of trade package contract. Bid bonds will be held for 90 days. Use the standard Bid Bond forms from The Whiting-Turner Contracting Company. Bid security will be returned to all bidders after the lowest responsible, responsive trade package contractor is determined and said contractor has agreed to enter into a contract for the work. Payment and Performance Bonds are waived for Trade Packages under $500,000 with the exception of the building envelope Trade Packages. If submitting on multiple Trade Packages and the aggregate of the packages meet or exceed $500,000, Payment and Performance Bonds will be required for each Trade Package. Please note that any and all bid packages above the $500,00 amount will require a 10% Bid Bond. All Pre-Qualified bidders are encouraged to seek minority business participation. The minimum minority participation goal for this project is 10%. Reference Whiting-Turner's MWBE plan as indicated within the bidding documents. Note: Bidders shall include with the bid proposal the ID Form - Identification of Minority Business Participation identifying the minority business participation it will use on the project and shall include either Affidavit A or Affidavit B as applicable. Failure to complete these forms is grounds for rejection of the bid. (GS 143-128.2c Effective 1/1/2002) Trade package bid proposals must be submitted on the appropriate trade package bid form that pertains to the trade package that you have been pre-qualified to bid. Bids shall be made upon the form of proposal provided by Whiting-Turner for the applicable trade package all forms must be filled out completely and accurately with all applicable information. Do not alter, change or add to the bid forms in anyway, shape or form, this or any added clarifications may result in your bid being withdrawn from consideration. All bids must be signed by an authorized Owner or Officer of the company. Please consult the Bid Manual for all forms. *No bids may be withdrawn for a period of 90 days after receipt of bid, The CM and Owner reserve the right to reject any and all bids, to waive informalities, and to award contract to other than low bidder should it be deemed in their best interest.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete, Concrete Finishing, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Thermal Insulation, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Specialty Doors and Frames, Entrances and Storefronts, Entrances, Automatic Entrances, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Ceilings, Acoustical Ceilings, Acoustical Ceiling Suspension Assemblies, Flooring, Resilient Flooring, Painting, Exterior Painting, Interior Painting.
Division 10 -	Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Lockers, Protective Covers, Flagpoles, Flags and Banners.
Division 11 -	Equipment, Refrigerated Display Equipment, Foodservice Equipment, Foodservice Storage Equipment, Refrigerated Food Storage Cases, Walk-In Coolers, Foodservice Shelving, Food Preparation Equipment, Food Cooking Equipment, Food Dispensing Equipment, Service Line Equipment, Soda Fountain Equipment, Coffee and Espresso Equipment, Ice Machines, Cleaning and Disposal Equipment, Library Equipment, Audio-Visual Equipment, Laboratory Equipment, Broadcast, Theater, and Stage Equipment, Athletic and Recreational Equipment, Athletic Equipment, Play Field Equipment and Structures, Exterior Court Athletic Equipment, Athletic Field Equipment.
Division 12 -	Furnishings, Window Treatments, Casework, Countertops, Furnishing Accessories, Waste Receptacles, Rugs and Mats, Entrance Floor Mats and Frames, Office Furniture, Seating, Institutional Furniture, Classroom Furniture, Library Furniture, Book Shelves, Multiple Seating, Site Furnishings, Trash and Litter Receptacles.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems.
Division 22 -	Plumbing, Plumbing Insulation, Instrumentation and Control for Plumbing, Plumbing Piping, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers, Drinking Fountains.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Ventilation Hoods, Commercial-Kitchen Hoods, Central Heating Equipment, Central Cooling Equipment.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting, Lighting Poles and Standards, Parking Lighting, Roadway Lighting, Area Lighting, Flood Lighting, Exterior Athletic Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Call Management, Audio-Video Communications, Distributed Audio-Video Communications Systems, Paging Systems, Public Address Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Electronic Surveillance, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Athletic and Recreational Surfacing, Fences and Gates, Planting Irrigation, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities.