SOE - CCTV Replacement

a. Uninstall existing Panasonic DVR and Pelco Power Supply in room 137. b. Uninstall existing CCTV cameras in all locations. c. Uninstall all existing CCTV camera cables. Reuse all existing locations for new CCTV cameras unless specified in Exhibit “1”. d. Install an AV Rack, Panasonic WV-NX400 network recorder and TRIPP-LITE SM1000RM1UTAA UPS or PBC approved equal, inside room number 137. e. Install additional Canister bays storage with 60 days of recording for 28 cameras at 15fps/UXGA resolution to new Panasonic WJ-NX400 or PBC approved equal in room number 137. f. Install new patch panel, and terminate on new patch panels new CAT6 wires from ISS IDF room number 124 to each existing camera location utilizing existing cable trays, J-Hooks and existing infrastructure. Add J-Boxes, ½” Conduit and J-Hooks where needed. g. Install Panasonic IP cameras WV-S2231L, or PBC approved equal, in existing drop ceiling locations using Panasonic mounts WV-Q174B or PBC approved equal. Actual locations indicated on Exhibit “1”. Add fall prevention wire to tie CCTV camera mount to above structure h. Install 1 Panasonic 360 Degrees IP camera dome model WV-S4550L or PBC approved equal in room 129A. See Exhibit “1”. i. Install Panasonic IP camera WV-S2231L or PBC approved equal on new locations wall and in new warehouse locations. See Exhibit “1”. j. Install Panasonic IP camera WV-S2231L or PBC approved equal on existing location walls including Main Lobby. See Exhibit “1”. k. Install Panasonic WV-S2531LN or PBC approved equal on exterior existing wall location. See Exhibit “1”. l. Install a new 32 GB SDXC Memory Card, SDHC Memory Card, SD Memory Card including Mini and micro memory card, on each Panasonic camera and program to record when network communication stops.

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.