Council Chamber TV Lighting System

To furnish and supply LED lighting system for the Council chamber for the Community Relations Department. Supply and install LED lighting system for the council chamber with following parameters: 1 Light for each seat on dais.1 light each for podium and staff tables. Use min. of 230W LED bulbs (comparable to >750W Tungsten bulbs). Dimmable/controllable, with either fixed or variable beam spread, to be determined. Associated power and control cables. Associated diffusion and control hardware. Install truss or other anchoring method for suspending lights from chamber audience ceiling. Install anchoring method to suspend lights above chamber dais. Lower existing ceiling-suspended projector in place to ensure projected images are not obstructed by the lighting truss/lights to be installed. Install necessary cable runs to connect with existing power. Install necessary cable runs for lighting control. Setup lighting controller in chamber TV broadcast booth. Site visit required to determine exact positioning, number of necessary lenses for proper light control, necessary cable lengths, anchoring methods, etc.

Division 26 -

Electrical, Lighting.