Northeast Ohio Regional Sewer

The purpose of this bid is to provide a (1) one year requirement contract to supply and deliver the District up to 644,050 pounds of active liquid emulsion polymer for effective treatment processes at the District's Easterly, Southerly, and Westerly Wastewater Treatment Plants (WWTPs) as specified. This quantity is the estimate needed for twelve (12) months. By submission of this bid, the bidder warrants that it is understood that this estimate was prepared by the District for the purpose of comparison of bids and that the estimated quantity is not guaranteed. In addition, the bidder warrants that it is understood that the District reserves the right to increase or decrease the amount purchased, as the District may deem desirable. Only emulsion polymer will be considered for the award of this contract. It will be understood that the terms "polymer" or "liquid polymer" shall mean "emulsion polymer." Each bidder shall bid only one (1) polymer. The treatment plants are in operation seven (7) days per week, 24 hours per day, 365 days per year. Bidder shall be capable of providing on-site technical assistance throughout the term of the contract. All bidders must provide a 24-hour contact name and phone number on letterhead paper, with their bid. All questions regarding any irregularities and /or requests for information related to these bid documents shall be submitted via e-mail to the Technical Services Group Contract Administration Lead, Nikki Zippay (zippayn@neorsd.org). Such inquiries will be answered as soon as is practicable. Any substantive information provided by the District in response to such questions will be distributed as an addendum to the bid documents. The deadline for submission of questions shall be 5:00 PM May 30, 2023. The District shall not be responsible for any oral instructions and/or opinions. Question Deadline 05/30/2023 at 5:00 PM ET

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.