Bisbee-Douglas International Airport Terminal Remodel

Task 1 – Remove and replace exterior windows as specified in architectural plans Task 2 - Prep exterior surface for application of stucco material in accordance with architectural design plans Task 3 – Demolition, removal, and disposal of walls, existing electrical, existing plumbing, plumbing fixtures, cabinetry, and other structures depicted in architectural plans of the existing conditions. Task 4 – Erect new walls that are depicted in the architectural plans. Task 5 – Install new plumbing (domestic water and sewer) Task 6 - Install a new electrical service entrance panel, install all new wiring, junction boxes, outlet boxes, plugs, switches, light fixtures, sub-panels, data junction boxes and data outlets in accordance with architectural plans. Data drop boxes must have conduit up to the top of the ceiling grid. Task 7 – Install a fire suppression sprinkler system and tie it into a fire alarm system with smoke detectors Task 8 – Hang 5/8” sheetrock, or as specified in architectural plans. Tape and texture walls (texture is hawk & trowel finish look). Task 9 - Make necessary modifications to HVAC supply ducts and returns, to ensure new rooms have adequate air flow and return. Task 10 – Prep and mask off walls for painting. Primer new walls and paint the complete interior of the building using Dunn Edwards Suprema eggshell finish paint. The walls will be painted in “miner’s dust” color, while door frames will be painted in Dunn Edwards Suprema eggshell enamel finish (color = Draw Your Sword). Task 11 - Install ceiling grid and ceiling tiles in accordance with architectural plans Task 12 – Install flooring – consult with owner to determine color, design and pattern Task 13 – Install plumbing fixtures – toilets, lavatories, sinks, faucets, etc. Task 14 – Install finishing touches to electrical items Task 14 – Cochise County I.T. staff will feed and wire data boxes Task 15 – Clean work area prior to departure; to include dusting and vacuuming.

1 Airline/Passenger Terminal, Renovation.

Division 01 -	General Requirements, Cleaning and Waste Management, Final Cleaning.
Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.