Construction of Sludge Storage Building

Staff will evaluate responses and present a recommendation to the City Council for consideration and approval at a properly scheduled meeting of the governing body. DRAWING AND CONSTRUCTION OF SLUDGE STORAGE BUILDING SMALL BUSINESSES AND MINORITY BUSINESSES ARE ENCOURAGED TO BID BID ENVELOPES SHALL BE CLEARLY MARKED "SEALED BID" WITH THE BIDDER'S N A M E & A P P R O P R I AT E SOLICITATION NUMBER (C22- 45) CLEARLY SHOWN ON FRONT OF THE ENVELOPE. The City reserves the right to reject any and all bids and to award more than one contract. Any bid received after the time set for the opening of bids, shall not be considered by the awarding agency, and shall be returned unopened to the bidder submitting same. The Miami Special Utility Authority is seeking a contractor to submit drawings and construction costs to build a sludge drying and storage building per the specifications below. o 40' X 30' Building o 60" wide by 36" deep 3000 PSI concrete Footing reinforced with (10) #4 rebar continuous. o 6" Slab with 3500 PSI concrete, reinforced with #4 Rebar on 24" centers over 4" of compacted rock. o Open on one 30' side o 12' X 12" 3500 PSI Concrete Walls on 3 sides, reinforced with #4 rebar on 12" centers each way. o 4' of overhang on open end. o All Metal Gabled Roof. This project is to be bid total and complete and Contractor will be satisfied of project expectations before a bid is submitted. Though the MSUA is seeking a total price bid, bidders must submit a listing of materials, to include quantities, with the bid submission. Construction will not begin until drawings have been reviewed by staff, approved by the MSUA, and a Notice to Proceed has been signed by all parties. All work performed shall be inspected by the project manager. Materials and workmanship shall be tested on a random basis by the contractor, project manager and/or MSUA engineer. Near the end of the project, a walk through will be conducted with onsite inspector(s) to develop a punch list of remaining items to complete.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Metal Doors and Frames, Entrances, Storefronts, and Curtain Walls, Windows, Hardware, Door Hardware.
Division 09 -	Finishes, Flooring, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies, Flagpoles.
Division 11 -	Equipment, Parking Control Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Video Surveillance, Electronic Detection and Alarm, Fire Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.