Similar Projects
Last Updated | 12/01/2020 06:10 AM |
Project Title | Town Hall Painting Interior/Exterior |
Physical Address | View project details and contacts |
City, State (County) | Indian Shores, FL 33785 (Pinellas County) |
Category(s) | Single Trades |
Sub-Category(s) | Painting |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Interior Painting: 1. Repair holes and cracks by filling and sanding to match existing, surrounding texture. 2. Clean all interior walls and door trim to remove excess dirt, stains and sanding debris. 3. Prime any areas with the potential of bleed through from existing staining. 4. Apply (2) coats of PPG Portersept interior latex (or approved equal) to all interior walls that match the existing colors. 5. Apply (2) coats of PPG Trim paint (or approved equal) to all door trims. 6. Inspect all painted surfaces for any missed spots or runs and touch up accordingly. 7. Remove all excess paint drips and runs, keeping all areas in their original state of cleanliness. 8. Interior painting to be completed during prearranged times daily or on nights and weekends if there is no increase in hourly labor fee. Exterior Painting: 1. Power wash all exterior surfaces and prep for painting. 2. Fill all cracks, holes or areas of broken, delaminated, or missing stucco with appropriate fill material for that surface. 3. Install new BASF NP1 urethane sealant or approved equal to the stucco wall to window band transition. 4. Inspect all balcony and exterior deck surfaces for delamination of deck coating material. Repair any area of delamination with in-kind material, to the Manufacturer’s specifications, to prepare for final deck coating. 5. Apply (2) coats of PPG Portersept (or approved equal that match the existing color) to all exterior stucco and EIFS (Exterior Insulation and Finish System) banding. Wall coatings should be applied by rolling application at approximately 225 sq. ft. per gallon yielding a DFT of 3 to 5 mils. 6. Recoat all exterior balcony decks using appropriate PPG products (or equal), ensuring full adhesion and water resistance. 7. Protect all walks, landscaping or other exterior building appurtenances for excess paint spillage. 8. Ensure all areas where exterior painting is performed are returned to their original condition of cleanliness. 9. Exterior Painting can be performed |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |