Security Fence Improvment Project

A. Remove existing approximately 950 feet of 7-foot fence from starting point A to end point B including, 92 line posts, 4 gate posts, 3-foot gate and 6-foot gate as shown in the attached pictures #1, #2, #3, #4, #5 and sketch #1. The existing post and plug shall be pulled and not cut off at ground level. B. Fill all existing unused post holes with pea stone and top off with 3-4 inches of new topsoil. C. Install a new 7-foot fence from point A to point B along the same fence line including all new fabric, framing, fittings and concrete as defined in Part 2, 3 and 4 to follow. At the starting point A connect new fence fabric to existing 7-foot line post. At end point B connect new fabric to existing 7-foot terminal post. D. Install a new 6-foot gate (see pic #4) and 3-foot gate (see pic #5) as defined in Parts 2, 3 and 4 to follow in the same locations as the existing gates.

Division 32 -

Exterior Improvements, Fences and Gates.