HLMP Hurricane Hardening

Roof [Gaf Timberline Series Dimensional Asphalt Shingle Roof) - Remove Existing Roofing Material Down To The Plywood Sheathing' Nail Off Roof Sheathing To Current Fbc Specicifications. Provide And Install Gaf Timberline Series Dimensional Asphalt Shingle (Color: Tbd By Owner). Install Secondary Water Barrier 2 Layers Of Underlayment With a Minimum Astm d 226 Type Ii, Or Astm d4869 Type Iii, Or Type i Underlayment, Or Equivalent Per Current Building Code Of Jurisdiction. Install a Self-Adhering Polymer Modified-Bitumen Underlayment Complyingwith Astm d1970, Such As Metalman Ht Underlayment Or Equivalent, Directly Over The 2 Layers. Installed Per Manufacturer's Specifications And Current Building Code Of Jurisdiction. Aluminum Drip Edge, Lead Pipe Flasings And Fbc Approved Aluminum Roof Vent Flashings. All Valleys Closed Cut Over Aluminum Flashing. On All Ridge And Hips Install Seal-a-Ridge Armorshield Asphalt Shingles. Follow All Installation Requirements Of Florida Building Code Product Approvals. All Fasteners Shall Be Stainless Steel. Provide Up To Ten Feet Of 1x8 Cedar Facia Board To Replace Damaged Or Deteriorated Existing Facia. Provide Allowance Of 7 Ifb 21-01 Hlmp Huricane Hardening Two 4x8 Sheets Of 19/32 Fire Resistant Plywood For Deteriorated Sheathing. Roof Area Is Approximately 200 Square Feet At a 4 And 12 Roof Pitch

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.