Generator Maintenance and Repair

To perform semi-annual Preventive Maintenance (inspections) and Corrective Maintenance (repairs) for listed generators Coolant System: 1. Inspect all clamps, verify condition of all hoses and identify any visual leaks 2. Verify proper operation of engine jacket water heater 3. Test coolant freeze point and verify coolant level 4. Test coolant additive package (DCA) for proper corrosion inhibitors 5. Inspect belt condition and tension, correct as required 6. Inspect radiator core for visual blockage or obstructions 7. Inspect for proper operation of intake louvers, motorized or gravity (if applicable) 8. Verify proper operation of remote radiator and belt condition (if applicable) 9. Check all hoses, piping, and connection (intake, exhaust, coolant, block heater, fuel and filters, oil lines and filter) 10. Drain and flush the cooling system. Refill with fresh coolant of appropriate type (50/50 mixture) 11. Complete coolant fluid analysis

Division 26 -

Electrical, Packaged Generator Assemblies.