Construction Manager (CMA) Services for the Repair and Alteration to the Land Port of Entry in Madawaska, Maine

The GSA, at the request of U.S. Customs and Border Protection, will provide repair and alteration to the existing Land Port of Entry in Madawaska, ME. The existing 4,865 GSF, circa 1959 Main Port Building (MPB) and secondary canopy will be upgraded and remodeled under this project. Total project square footage is 8,989 GSF. The existing facility will be modernized to include the following features: counter, work area, and offices; public counter and detention area, public restrooms, mechanical systems and security systems and site work. This project would reconfigure the existing building for better flow of operations and visibility on the main floor and provide personnel functions in the basement of the building which are currently missing. Enclose secondary inspection areas for Privately Owned Vehicles (POV) and two (2) of the existing inspection bays, which are currently covered by a canopy, be enclosed. Increase security and weather protection are included in the new Program of Requirements (POR) including fencing and gates at three (3) sides of the site.. A new roof, brick repointing and repair, paving, stabilization of the river bank, upgrades to the HVAC system and plumbing systems are required. Port operation will be continuous 24/7/365 throughout all construction phases on a very constrained site. It will be the CM's responsibility to oversee the work as discussed within this section and ensure that it is fully executed within the constraints of the construction budget. The CMa is responsible to ensure that the GSA interests as the owner are well served. In this regard, the CMa shall assist the GSA in ensuring that the GSA requirements with regard to scope, schedule, budget, quality and other aspects of the project are met. The CMa shall serve as a facilitator and coordinator of the activities of all parties to ensure that the project execution proceeds according to plan. During the Design Stage, the CMa shall perform services relating to constructability, construction strategy and logistics, and budget control. The CMa shall also serve as the value engineering (VE) consultant. The CMa shall participate in the commissioning process, and coordinate with the GSA and the Commissioning Agent (introduced below) to identify appropriate commissioning program goals and to develop supporting inspection and testing practices to meet the objectives of the project commissioning plan. The CMa will subcontract commissioning services that are included in the Statement of Work. . The Commissioning Agent (CxA) is responsible to the CMa to provide documented confirmation that the completed facility fulfills the functional and performance requirements of the CMa contract with GSA, the facility occupants, and the facility operators. The CxA will perform work as necessary to verify and document compliance with the GSA performance objectives throughout design, construction, start-up, and the initial period of operation. The specific activities, tasks, and deliverables required of the CxA are further delineated by the CMa. The GSA may engage other parties to perform specialized duties and requirements as appropriate for the project.

Misc. Buildings, 8,989 SF Renovation.

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Entrances, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Acoustical Ceilings, Flooring, Carpeting, Acoustic Treatment, Painting.
Division 12 -	Furnishings.
Division 21 -	Fire Suppression, Water-Based Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Fences and Gates, Irrigation, Planting.
Division 33 -	Utilities.