SCADA Project

Jackson Avenue Chemical Building a. Demolish i) Existing Interior Window Chemical Room 2) Existing Exterior doors (3 double doors with transoms, 1 single door) 3) Existing Flow Meter and Corporation Stops 4) Existing Metering Pump Shelves 5) Existing Drum Scales 6) Existing Block Wall for proposal Exhaust Fan Opening b. Furnish and install three (3) exterior doors with windows. e. Furnish and install an exterior single door d. Furnish and install an interior single door. e. Furnish and install two (2) chemical tanks with a scale system and all wire and conduit. f. Furnish and install two (2) metering pumps and all associated tubing. g. Install two (2) existing metering pumps and all associated tubing. h. Furnish and install the following instrumentation: 1) One (1) 12" Flow Meter with Readout Display and all associated wire and 2) One (1) Finished Water Turbidimeter and an associate wire and 3) One (1) Chlorine Residual/PH Analyzer and all associate wire and 4) One (1) Raw Water pH Analyzer and all associate wire and conduit 5) Corporatism Stops and associated supply and drain plumbing for i. Furnish and install a static mixer. j. Furnish and install four (4) intrusion alarms fir the proposed exterior doors and all associated wire and conduit k. Furnish and install an exhaust fan with corrosion resistant shutter l. Sandblast and paint 2S feet of ductile irom pipe. m. Furnish and install a process control and associated wire and conduit for the metering pumps and instrumentation n. Furnish and install an antenna and associated coaxial cable. o. Furnish and install wire and conduit from the existing generator ATS to the control panel. Taylor Road Well Field a Demolish the two (2) existing electrical enclosures. b. Furnish and install two (2) well level senors and associated wire and conduit. e. Furnish and install two (2) flow meters and an associated wire and d. Furnish and install a wen pump control panel and all associated wire and conduit. e. Furnish and install two (2) well pit high water floats and all associated wire and conduit. i. Furnish and install an for two (2) existing 100 HP VFD and all associated and conduit. g. Furnish and install an antenna and associated coaxial cable. h. Furnish and install wire and conduit from the existing generator ATS to the control panel Add/Alternate a. Furnish and install a pavilion type structure for the existing generator/ electrical platform, Maple Road Tank Site a Furnish and install a pressure transducer with readout and all associated wire and conduit. b Furnish and install two (2) intrusion alarms and all associated wire and conduit c. Furnish and install a communications panel d. Furnish and install wire and conduit from the existing generator ATS to the communications panel. e. Furnish and install wire and conduit from the existing pressure transducer and now meta for the upper pressure zone to communication panel

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.