41--Walk In Cooler

o replace the current refrigerated storage box with a 20' x 12' x 8' 8" new storage box and have a new condenser and evaporator unit installed and connected. b. Specific Requirements: 1) Supply and install 20'x12'x8'8" cooler with insulated floor, a 36"x84" RSNE insulated door and TPO membrane roof. Of note, we will build and install the structure in a manner that will allow for a simple future conversion to a freezer. 2) Wall panels: The interior and exterior finishes are 26 gauge white embossed Galvalume pre-painted steel. The insulating core is 4" thick foamed-in-place polyisocyanurate insulation. 3) Floor panels: The interior finish is .063 aluminum diamond tread plate backed with 5/8" thick plywood. The concealed exterior finish is 26 gauge white embossed galvanized steel. The foam core is 3-1/2" thick of urethane insulation. 4) Roof panels: The interior finish is 26 gauge white embossed Galvalume prepainted steel. The insulating core is 4" thick foamed-in-place polyisocyanurate insulation. The exterior finish is 26 gauge white embossed Galvalume pre-painted steel with tapered ISO over roof deck with fully adhered .060 TPO roofing membrane. 5) Door: One (1) 36" x 84" manual swing freezer door and frame; includes lockable hardware, neoprene gaskets, frost-stop heater, interior/exterior kick-plates, and white embossed galvanized steel finish. Hinge right. 6) Install evaporator coil and condensing unit applicable for the walk-in storage box

Division 11 -

Equipment, Foodservice Storage Equipment, Walk-In Coolers.