Paving

The work shall consist of constructing a Hot Mix Asphalt Pavement using designated mix types for the roadways, sidewalks and parking lots. Project Locations Bald Mountain Road: Mill centerline cracking, remove problematic areas and compact surface to property density, furnish and install 2 compacted inches of approved 19 mm HMA. Crack Seal and Apply tack coat. Furnish and install a 1.5 inch compacted surface course of approved 12.5 mm HMA. Approximate dimensions are 20' X 10,360'. Milling shall be incidental to paving and inclusive in the per-ton price for this road. Hyatt Road (Apron): Provide fine grade and proper compaction. Furnish and install 2 compacted inches of approved 19 mm HMA. Apply tack coat. Furnish and install a 11/2-inch compacted surface course of approved 12.5 mm HMA. Approximate dimensions are Taper from 30-20' X 50'. Bonnie Point Road: Approximate dimensions are 20' X 2,300'. Grind butt joints as required. Apply tack coat(s). Furnish and install an average of 1/2" compacted approved shim mix as necessary. Furnish and install a compacted 1.5 inch surface course of approved 12.5 mm HMA. Approximately 20' X 200' consecutive feet of the overall road will be excavated to investigate underlying issue and will therefor need fine grade and proper compaction provided. Furnish and install 2 compacted inches of approved 19 mm HMA. Sidewalk (Allen St to Rangeley Auto): Provide fine grade and proper compaction. Furnish and install 2 compacted inches of approved 19 mm HMA. (Maybe use 12.5mm )

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.