Market Center Lift Station and Force Main Improvements

Scope of Work: A. A new 1.0 MGD Firm Capacity Triplex Lift Station adjacent to the existing lift station at the site shown in the construction drawings along with the construction of approximately 6,950 linear feet (LF) of 8-inch force main. B. Lift Station construction shall be in accordance with the contract documents and drawings, be all inclusive, and includes but not limited to: 1. Reconstruction of influent gravity sanitary sewer to route flow to new lift station yard piping, complete. 2. Construction of new wet well for new submersible pumps, complete. 3. Installation of triplex pump configuration in new wet well, complete. 4. Construction of new manifold vault, complete. 5. Construction of new meter vault, complete. 6. Installation of new power service to serve new lift station, complete. Coordination with Trinity Valley Electric Co-op required. 7. Installation of all system electrical, control and instrumentation, complete. 8. Paving and other site improvements. 9. Site clean-up and restoration. 10. All required testing, quality control and certifications. 11. Maintain existing lift station operation during construction activities until new lift station is accepted and put into service. Includes necessary flow bypass and temporary power needs for temporary shut-downs. 12. Partial Demolition, select salvage and abandonment of existing lift station infrastructure after new lift station is accepted and put into service. C. Force Main construction shall be in accordance with the contract documents and drawings, be all inclusive, and includes but not limited to: 1. Construction of the force main which includes 3 areas where construction is to be completed by bore. 2. Compliance with TxDOT requirements for construction of force main by bore across Spur 557. 3. Installation of combination air vacuum vault and isolations valve assemblies, complete. 4. Site clean-up and restoration. 5. All required testing, quality control and certifications. 6. Maintain existing force main operation during construction activities until new force main is accepted and put into service. Includes necessary flow bypass and temporary power needs for temporary shut-downs.

Division 03 -	Concrete.
Division 04 -	Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection.
Division 08 -	Openings.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Toilet, Bath, and Laundry Accessories, Fire Protection Specialties, Fire Extinguishers, Storage Specialties.
Division 11 -	Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork.
Division 32 -	Exterior Improvements, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Disinfecting of Water Utility Distribution, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains.
Division 40 -	Process Integration, Water Process Piping.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.