Similar Projects
Last Updated | 01/05/2024 11:33 AM |
Project Title | Water Line Replacement |
Physical Address | View project details and contacts |
City, State (County) | Knoxville, TN 37902 (Knox County) |
Category(s) | Heavy and Highway, Sewer and Water |
Sub-Category(s) | Site Development, Water Lines |
Contracting Method | Competitive Bids |
Project Status | Bidding, Construction start expected March 2024 |
Bids Due | View project details and contacts |
Estimated Value | $2,574,185 [brand] Estimate |
Plans Available from | Civil Engineer |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Per addendum 3 bid date pushed to 11/13/23. All parties will be notified of new bid date in addendum 4 The Project includes the following Work: Approximately 4,759 L.F. of 20" Class 350 Ductile Iron Water Line, 9,398 L.F. of 6" Class 350 Ductile Iron Water Line, 1,369 L.F. of 4" Class 350 Ductile Iron Water Line, 367 L.F. of 2" Class 250 PVC Water Line, 18 Fire Hydrant Assemblies, and various appurtenances. Bids are requested for the following Contract: RURAL DEVELOPMENT WATER LINE REPLACEMENT - PROJECTS B, W, AND Y NORMAN RD, CLINTON HWY, OLD CLINTON HWY, STROLLING LANE, SHEPARD LANE, STANLEY ROAD, CAUSBY ROAD AND WELLS ROAD RGC Project No. 19802 The Project has an expected duration of 300 days. Instructions to Bidders All Bidders must be licensed Contractors as required by the Contractor's Licensing Act of 1994 (Latest revisions). Bidder's name, address, license number, license limit, expiration date and that part of classification which applies to the Project(s) and the name, address and licensing information for Plumbing, HVAC and Electrical Contractors must be on the sealed envelope containing the executed Bid Proposal. All required items must be listed, with any item(s) that are not applicable to the Project in accordance with the Regulations to be marked "not applicable to this project." In compliance with the act, sealed envelopes will not be opened unless all required information is properly displayed. For all further requirements regarding bid submittal, qualifications, procedures, and contract award, refer to the Instructions to Bidders that are included in the Bidding Documents. American Iron and Steel Section 746 of Title VII of the Consolidated Appropriations Act of 2017 (Division A - Agriculture, Rural Development, Food and Drug Administration, and Related Agencies Appropriations Act, 2017) and subsequent statutes mandating domestic preference applies an American Iron and Steel requirement to this project. All iron and steel products used in this project must be produced in the United States. The term "iron and steel products" means the following products made primarily of iron or steel: lined or unlined pipes and fittings, manhole covers and other municipal castings, hydrants, tanks, flanges, pipe clamps and restraints, valves, structural steel, reinforced precast concrete, and Construction Materials. Bidder shall submit all questions about the meaning or intent of the Bidding Documents to Engineer in writing. Contact information and submittal procedures for such questions are as follows: Contact shall be a minimum of seven days prior to the bid date by email addressed to bobcolvin@rgc-a.com. |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
![]() Engineered Spec Sheet ![]() Architectural Plans ![]() Other Documents |