Similar Projects
Reported | 06/11/2021 12:00 AM |
Project Title | Cooler and Freezer Dry In Services |
Physical Address | View project details and contacts |
City, State (County) | Evans, Grovetown, GA 30809 (Columbia County) |
Category(s) | Single Trades |
Sub-Category(s) | Mechanical |
Contracting Method | Competitive Bids. |
Project Status | Bidding |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | County Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Order of schools to be reviewed at Pre-bid meeting: 1) Greenbrier Elementary, 5116 Riverwood Parkway, Evans GA 30809. 2) Riverside Middle, 1095 Fury’s ferry Rd., Evans GA 30809.3)Lakeside Middle, 527 Blue ridge Dr., Evans GA 30809. 4) Brookwood Elementary, 455 S. Old Belair Rd., Grovetown GA 30813. Work is to perform cooler and freezer dry-in work to four CCSD locations. It include all diamond plate flooring, rolled embossed metal, 4x8 insulation board, cork tape, butyl rubber, and food grade silicone. Contractor will provide all tools, labor, proper screws to complete the job, 12 gauge stainless steel thresholds contoured to fit each of the cooler and freezer boxes. All metal, insulation cuts and bending will be done by the contractor. All sealing of the boxes with butyl rubber and silicone will be completed by the contractor. Seal each seam of original flooring with butyl rubber. Install new diamond plate flooring on top of original flooring. Ensure metal edges are cut to ensure minimum gaps between the metal. Secure flooring with beveled stainless steel screws. Top of screws must be level with flooring. Seal all wall and ceiling seams with butyl rubber. Seal all corner seams top and bottom with butyl rubber. Seal all upper and lower outer seams with 2x2 insulation board covered with embossed metal to fit the 2x2 insulation board and 1” lip to secure with screws. Cover all wall seams with cork insulation. Cover all wall seams with embossed metal, bent to fit, and with a 1” lip to fasten to wall with screws. Silicone and seal all new installed metal. Install and seal a new 12 gauge threshold for each cooler and freezer door. Screws must be flush with top of metal. |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |