Sweeney Water Treatment Plant Phase II Ozone Upgrades

This is a single prime contract. Pre-Bid Conference: A pre-bid conference will be held, and IS NOT mandatory. Bids must be received by Julia Faircloth, Procurement Manager, or designee in the IT Conference Room. The official time will be by the clock in the IT Conference Room at 235 Government Center Drive and no late bids will be accepted. The Bidders are responsible for allowing time for traffic and parking prior to delivering the bids to the IT Conference Room. It is the bidder's responsibility to ensure that the bids are received on time. Cape Fear Public Utility Authority cannot guarantee the accuracy of documents and information at the plan rooms. Official sets only available from Cape Fear Public Utility Authority. 1. Plan Rooms: View online. Carolina AGC and Hispanic Contractors Association of the Carolinas: View online. An official set of relevant bid documents will then be provided to prospective bidder via email. If you send an email to bids@cfpua.org and do not receive a response with two (2) business days, please call 910-332-6472 or 910-332-6589. Bids received from bidders who cannot prove registration at time bids are due will not be opened or considered. Section 00111 Advertisement for Bids CFPUA Page | 2 Rev. 06/02/16 Bid Bond: A deposit is required with the submission of the bid. When a deposit is required, the bidder must submit with the bid cash or a certified check, drawn on a bank or trust company authorized to do business in the State of North Carolina, payable to Cape Fear Public Utility Authority, in an amount at least equal to of the total amount of the bid, as a guarantee that a contract will be entered into and that satisfactory performance and payment bonds will be executed. In lieu of making the cash deposit above described, a satisfactory bid bond in the amount of five percent (5%) of the total bid, executed by a corporate surety licensed under the laws of the State of North Carolina to execute such bonds, shall be submitted with each bid, conditioned that the surety will upon demand forthwith make payment to the obligee upon said bond if the bidder fails to execute the contract in accordance with the bid bond. This deposit shall be retained if the successful bidder fails to execute the contract within ten (10) days after the award of the bid or fails to give satisfactory surety as required in North Carolina General Statutes Section 143-129. Affidavit and Certification of Non-Collusion, Non-Suspension and Non-Conviction: The Affidavit and Certificate of Non-Collusion, Non-Suspension and Non-Conviction provided with bid documents must be completely executed and submitted with bid. Each bidder must show evidence that it is licensed as a contractor under Chapter 87 of the North Carolina General Statutes. Bid Opening: Bids must be in by Tuesday, August 23, 2022 at 11:00 AM in the IT Conference Room, 2 nd Floor of 235 Government Center Drive. Bids must be received by Julia Faircloth, Procurement Manager, or designee in the IT Conference Room. The bidder must have the following NC General Contractor's license to be qualified to perform the work associated with this bid: Limitation: Unlimited Classification(s): Public Utility No bid may be withdrawn after bids have been opened, except as provided in the North Carolina General Statutes. If the bidder fails to complete and submit all requirements stated in this Advertisement for Bids and those further requirements stated in the Instruction to Bidders included with the relevant contract documents, the Cape Fear Public Utility Authority may deem such failure nonresponsive and therefore a forfeiture of the bid. Cape Fear Public Utility Authority reserves the right to reject any and all bids. All inquiries concerning this bid shall be directed to CFPUA Purchasing Division by e-mail to bids@cfpua.org. Engineer's Opinion of Probable Construction Cost: $1,694,000. - $1,980,000 DEADLINE FOR QUESTIONS: TUESDAY, AUGUST 16, 2022 AT 2:00PM

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.