Similar Projects
Last Updated | 02/28/2023 09:08 AM |
Project Title | Gehl AL550 Loader |
Physical Address | View project details and contacts |
City, State (County) | Wernersville, PA 19565 (Berks County) |
Category(s) | Single Trades |
Sub-Category(s) | Service/Term Contracts |
Contracting Method | Competitive Bids |
Project Status | Sub-Bidding, Construction start expected March 2023 |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | Agency's Affiliate |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | I. Objective The Department of Human Services ("DHS") is seeking a contractor to provide a GEHL AL550 ARTICULATED LOADER to Wernersville State Hospital ("WeSH"), 160 Main Street, Wernersville, Berks County, Pennsylvania, 19565. II. Background WeSH is soliciting for a GEHL AL550 Articulated Loader to replace an aging skid loader necessary for completing various tasks at WeSH. III. Scope of Work This solicitation is for the provision of a Gehl AL550 Articulated Loader. NO SUBSTITUTIONS WILL BE ACCEPTED. A. Description: GEHL AL550 Articulated Loader. Includes: 1. Length with Bucket on Ground (mm) 199.9" (5077) 2. Shipping Length (mm) 167.7" (4260) 3. Front Wheel Center to Pivot Pin (mm) 32.8" (833) 4. Wheelbase (mm) 79" (2007) 5. Rear Overhang (mm) 52.2" (1326) 6. Height to Top of Cab (mm) 97.1" (2467) 7. Hood Height (mm) 69.9" (1775) 8. Maximum Operating Height (mm) 157.8" (4008) 9. Bucket Hinge Pin Height (mm) 130.5" (3315) 10. Ground Plane to Bucket Edge Height (mm) 123" (3125) 11. Dump Clearance at Full Height (mm) 99" (2515) 12. Dump Reach at Full Height (mm) 20.9" (529) 13. Width over Tires - Narrow / Wide (mm) 64.7" / 79.4" (1645 / 2017) 14. Tire Gauge 48.4" / 62.8" (1230 / 1595) 15. ROPS Width (mm) 53.9" (1370) 16. Ground Clearance (mm) 14.6" (370) 17. Turning Radius with Bucket (mm) 143.2" (3637) 18. Outer Turning Radius (mm) 130.3" (3310) 19. Inner Turning Radius (mm) 62.1" (1577) 20. Articulation Angle from Center (mm) 45 21. Rollback at Height 45 22. Maximum Dump Angle at Full Height 45 23. Bucket Rollback at Ground 45 24. Attachment Pivot Clearance (mm) 7.5" (190) 25. Wheel Radius (mm) 19.5" (495) 26. Bucket Width - standard (mm) 66" (1676) 27. Engine Manufacturer Yanmar 28. Model / Number of Cylinders 4TNV98CT / 4 29. Displacement (L) 0.87 gal. (3.3 L) 30. Power (kW) @ 2300 rpm 1 64.4 hp (48) 31. CAPACITIES a. Static Tipping Load with Bucket - Straight (kg) 6,409 lbs. (2907) 6,743 lbs. (3059) b. Static Tipping Load with Bucket - Full Turn (kg) 4,917 lbs. (2230) 5,244 lbs. (2379) c. Static Tipping Load with Pallet Forks - Straight (kg) 4,980 lbs. (2259) 5,302 lbs. (2405) d. Static Tipping Load with Pallet Forks - Full Turn (kg) 3,921 lbs. (1778) 4,157 lbs. (1885) e. Bucket Breakout (kg) 12,661 lbf (5743) 12,661 lbf (5743) f. Operating Weight (kg) 9,150 lbs. (4150) 9,500 lbs. (4309) 32. HYDRAULICS a. Work Hydraulic System Flow (L/min) STD 18.4 gpm (69.5) b. High-Flow Auxiliary Hydraulics - optional (L/min) 25.6 gpm (96.9) c. Work Hydraulic System Pressure (bar) 2,900 psi (200) d. Drive Hydraulic System Pressure (bar) 6,092 psi (420) e. Drive Hydraulic Reservoir Capacity (L) 19.5 gal. (73.8) 33. OTHER a. Battery 12-volt b. Fuel Tank Capacity (L) 25 gal. (95) c. Maximum Travel Speed (km/hr) 7/12/19 mph (11/20/30) d. Tire Size - Standard 405 / 70-20 e. 405 / 70 - 20 14 Ply MPT03 64.7 / 79.4 (1645 / 2017) f. 405 / 70R20 Radial Industrial Tires 64.7 / 79.4 (1645 / 2017) g. 500 / 45 - 20 Flotation 16 Ply Bias Tires 70.4 / 79.2 (1788 / 2012) h. 600 / 40 - 22.5 Floatation Bias Tires -1 per ISO14396 B. Material Bucket part#811649 1. 74" Wide 26" High 42" Deep 2. 27.2 CU. FT. C. Pallet Fork set 1. Rail Pallet Fork style - HI-VIS 2. Walk Through Back Plate Design 3. 5500 LB. Cap. 4. 1-1/2"X4" Tines Mandatory Bid Requirements: The following must be filled out, completed, and electronically attached to your bid: 1. Reciprocal Limitations Act Requirements 2. Worker Protection and Investment Form V. Contract Award Bid Award shall be to the lowest responsive and responsible bidder. VI. Contact Information Ella Gindin, Business Office will be the contact on behalf of WeSH. Phone: 610-670-4140 Email: egindin@pa.gov All matters relating to the purchase order shall be directed to: Mary Weinus, Purchasing Agent Phone: 610-927-4700 Email: mweinus@pa.gov |
||||||
Details |
|
||||||
Bidder's List | View project details and contacts | ||||||
Prospective Bidders | View project details and contacts | ||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |