Heartland State Trail CSAH 10 Bridge

SUMMARY OF WORK A. The work will be done under one prime contract that includes: General Construction. B. The following summary is a general guide to the scope of work. It should not be construed as a detailed list of work included in the contract. 1. Construct 3-span weathering steel truss bridge (2-100 foot spans and 1-160 foot span). 2. Construct two reinforced concrete abutments and two reinforced concrete piers (approximately 205 CY concrete and 19,718 LBS reinforcing steel). 3. Install CIP piling (approx. 1590 LF and 4 test piles). 4. Complete associated approach grading work. 5. Install bituminous pavement for trail (approx. 590 SY).

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.