Audio/Vidual Classroom Technology

The following requirements are applicable to both systems: 1. The system components shall all be correctly listed and labeled for their intended use. 2. All products shall must be new and under warranty at the time of installation. B-stock, previously installed, refurbished or used equipment cannot be used on this project. 3. The selected contractor shall provide all options, accessories and hardware necessary for the proper function of the proposed system. 4. All equipment and enclosures shall be installed plumb and square per manufacturer’s instructions. 5. All equipment, except that designated as movable, portable or loose equipment, shall be secured and permanently attached to the permanent structure in a manner which will require the use of a tool (e.g.: screw driver, nut driver, etc.) for removal. 6. All equipment must be installed pursuant to the manufacturer’s guidelines in a manner that preserves equipment warranties. Equipment must be installed by properly certified and/or licenses personnel where such is required by manufacturer guidelines. 7. Equipment and material installation must be done in accordance with applicable building and other codes. 8. Equipment installation must be done in a manner that is aesthetically pleasing and minimizes adverse visual impact to the classroom environment. Where possible cabling shall be run through existing conduit and/or overhead above drop ceilings to preserve the visual appearance of the room. Mounting hardware and surface-mounted controls, covers, etc. shall be color matched to existing wall/ceiling paint and/or color and conduit raceways, where necessary, shall also be selected to minimize visual impact.

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.