2021 Sanitary Sewer Lift Station Improvements

The work to be performed will generally consist of sanitary sewer lift station improvements at six lift station sites in the Town of Hayneville and provision and installation of two magnetic flow meters generally as follows: BASE BID Lift Station #7: Furnish and install a new 40 HP pump including all electrical improvements, furnish and install a new 4" check valve at existing 90 degree bend in valve box, furnish install new discharge piping to include an insert valve and emergency quick disconnect piping, any required bypass pumping, as well as any other requirements included on project plans. Lift Station #8: Furnish and replace a single 20-HP pump including all electrical improvements, replace an existing 4" ARV, install new 4" quick connect fittings, any required bypass pumping, as well as any other requirements included on project plans. Lift Station #9: Furnish and replace an 11-HP pump including all electrical improvements, straighten and secure existing power supply pole, furnish and replace entire control panel and wiring, secure existing 4" stainless steel vent with all stainless concrete anchor bolts, as well as any other requirements included on project plans. Lift Station #10: Furnish and replace a single 5-HP pump, furnish and replace existing PVC with new stainless steel discharge piping inside and outside the wet well, furnish and install a new valve box with all new valves and check valves, any required bypass pumping, as well as any other requirements included on project plans. ALTERNATE 1 Furnish and install magnetic flow meter and pipe improvements in existing open vault on lagoon effluent discharge line; Furnish and install magnetic flow meter and doghouse manhole on lagoon influent force main; Allowance for SCADC controls for influent/effluent meters ALTERNATE 2 Lift Station #7 Furnish and replace existing piping and valves from pump discharge through exit of valve box. ALTERNATE 3 Lift Station #7 Furnish and install a new valve vault vent pipe. ALTERNATE 4 Lift Station #7 Replace wet well aluminum hatch. ALTERNATE 5 Lift Station #8 - Furnish and replace existing piping and valves from pump discharge through exit of valve box. ALTERNATE 6 Lift Station #8 - Furnish and install a new valve vault vent pipe. ALTERNATE 7 Lift Station #8 Replace wet well aluminum hatch. ALTERNATE 8 Lift Station #9 Furnish and install additional gravel in driveway and inside lift station fence, cut and remove tree on site, renovate existing fencing and install new access gate, and any other improvements.

Lift and Pump Stations, Renovation.

Division 03 -	Concrete.
Division 04 -	Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection.
Division 08 -	Openings.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Toilet, Bath, and Laundry Accessories, Fire Protection Specialties, Fire Extinguishers, Storage Specialties.
Division 11 -	Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork.
Division 32 -	Exterior Improvements, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains.
Division 40 -	Process Integration, Water Process Piping.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.