Hunter Branch Rail Trail over the Clove Creek Pedestrian Truss Fabrication

Hunter Branch Rail Trail over the Clove Creek Pedestrian Truss Fabrication, Town of Hunter, Greene County, New York. The project consists of fabricating and delivering a 90 ft. pedestrian truss with a 5’-0” (minimum) clear width. This project will have no involvement with NYSDOT; however, the truss shall be designed and fabricated in accordance with NYSDOT and AASHTO Standards. The Town will rely on the successful fabricator’s internal QC/QA policies and procedures to ensure fabricated units are in accordance with NYSDOT specifications and the approved shop drawings.

Bridge, Renovation.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.