Power Converter Installation

This statement of work is for installation of a 400 Hertz converter installation for the Guided Weapons Evaluation Facility (GWEF), 782 Test Squadron/RNWG, Eglin AFB, FL. The new 400 Hertz converter will be provided by the GWEF. The Contractor shall be required to furnish all materials, equipment, labor and personnel necessary to accomplish this work in accordance with the contract requirements. The Contractor is expected to maintain safety requirements and demonstrate standard construction methods, at all times. The contractor shall perform all work listed below: A. Disconnect and remove existing 40A circuit feeding previous converter. B. Disconnect and remove existing converter output circuit. C. Install (1) 125A 3 pole 480V circuit breaker in existing Siemens FC1 switchboard. D. Install (1) input circuit from existing switchboard to new converter terminating on input circuit breaker within the converter. E. Install a 600A rated parallel output circuit from the converter to its load termination (this circuit capacity is based upon the output circuit breaker size within the new converter). F. Install (1) lot conduit, boxes, hardware, conductors and misc. hardware to install the above referenced items. G. Install a new user-provided 400 hertz power converter. The unit is replacing an old converter that has already been removed. H. Disposal of any waste generated by the installation

Division 26 -

Electrical.