Lime Building Renovation at the R.J. Chandler WTP

Lime Building Renovation at the R.J. Chandler WTP The OWNER reserves the right to waive any informalities, or reject any or all Bids, and to award the Contract to the lowest responsible, responsive bidder. Each BIDDER is required to file with his or her Bid either a Cashier's Check draw on an Alabama bank or a Bid Bond executed by a surety company duly authorized and qualified to make such bonds in the State of Alabama, payable to the WATER WORKS AND SEWER BOARD OF THE CITY OF SELMA for an amount not less than five percent (5%) of the total amount of the Bid. Performance and Payment Bonds and evidence of insurance as required in the Bid documents will be required at the signing of the Contract. All BIDDERS bidding in amounts exceeding $50,000 must be licensed under the Provision of Title 34, Chapter 8, Code of Alabama, 1975, as amended, and must be licensed for the type of work on which the Proposal is submitted. BIDDERS must show evidence of license before bidding or Bid will not be received or considered; the BIDDER shall show such evidence by clearly displaying his or her current license number on the outside of the sealed envelope in which the proposal is delivered. No BIDDER may withdraw his or her Bid within sixty (60) days after the actual date of the opening thereof. Document Notes: Copies of the CONTRACT DOCUMENTS (Plans, Specifications, and Bid Proposal Documents) may be obtained at the office of HSA ENGINEERS, INC located at #1 SATTERFIELD STREET, SELMA, ALABAMA 36702-0929, (334) 875-1960 upon payment of $100.00 for each physical set. Bidder must obtain physical set of Contract Documents in order to bid. All BIDDERS submitting a online bid who return Plans and Specifications to ENGINEER, in useable condition, within ten (10) days of the Bid opening will receive a full refund. Non-bidders will receive no refunds. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. $60,000 to $150,000

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.