RFQ - Builder Sustainment Management System Design Professional Services

This Request for Statement of Qualifications ("RFSQ") is issued in accordance with State of Utah Procurement Code, Utah Code Annotated (UCA) Chapter 63G-6a, and applicable Rules found in the Utah Administrative Code (UAC). If any provision of this RFSQ conflicts with the UCA or UAC, the UCA or UAC will take precedence. Purpose of this Solicitation The State of Utah, Division of Purchasing has issued this RFSQ to obtain statements of qualifications from companies interested in providing BUILDER Sustainment Management System services with the intent to award a contract under Utah Procurement Code 63G-6a-1501 for the Small Purchases of Professional Service Providers and Consultants. Background The Architect-Engineer (A-E), in accordance with the attached Statement of Work (SOW) in the Buyer Attachments section of this RFSQ, shall implement and provide continuing reinspection of the BUILDER Sustainment Management System (BUILDER SMS), hereafter referred to as BUILDER.. This Statement of Work refers specifically to the implementation and reinspection of BUILDER i n t h e State of Utah. Legislative Appropriation Additional funding may be added to the awarded contract(s) if additional funding is provided to the procurement unit for the purpose identified in the scope of work by the legislature. Evaluation of Statements of Qualifications Each Statement of Qualifications received shall be evaluated for responsiveness in as outlined in the Utah Procurement Code. Pursuant to Administrative Rule R33-15-303, the Conducting Procurement Unit will evaluate the qualifications of all submitted responses and will select the vendor who is most qualified for direct negotiations. Any exceptions to the content of this RFSQ, including the prerequisites, must be protested in writing to the Division of Purchasing prior to the closing date. To be responsive and responsible Vendors must review and respond to the following sections of this RFSQ: Prerequisites, Buyer Attachments, and Questions. The Prerequisites Section contains the objective criteria that will be used to evaluate the statement of qualifications, including the mandatory minimum requirements and general requirements that Vendors must certify that they have read, understand, and agree in order to submit a response. The Buyer Attachments Section contains the required State of Utah Terms and Conditions of the RFSQ, which are non-negotiable, the General Provisions which apply to this RFSQ, and any additional required forms. The Questions Section contains the questions that Vendors are required to answer in order to submit their Statement of Qualifications. Vendors must review each section carefully. The method of contractor selection has not been determined at this time. Question Submission Close Date 8/8/2022 4:00 PM MDT

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Entrances, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Acoustical Ceilings, Flooring, Carpeting, Acoustic Treatment, Painting.
Division 12 -	Furnishings.
Division 21 -	Fire Suppression, Water-Based Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 26 -	Electrical, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Fences and Gates, Irrigation, Planting.
Division 33 -	Utilities.