Lecanto Primary School Storefront Classroom Separations (Rooms 109, 110, 111 and 112)

Two (2) Store Front Style Interior Room Separations At Lecanto Primary Rooms 109 & 110. Reference Exhibit a And b. Two (2) Three-Bay Partitions Appox. 123" x 107 1/2", Each Having One 3'0" x 7'0" Door To Centered With Two Equal Sidelites. Sidelites Are To Have One Intermediate Horizontal Division At "Chair Rail" Height. Install a 2” x 5” x 1/8 Anodized Square Tube Under Drop Ceiling And Ancor At Each End. Framing Is To Be Anodized 1-3/4" x 4-1/2" Center-Set Flush Glaze For 1/4"Monolithic Infill. Doors Are To Be Anodized With Transom And Store Front Material In Finished Opening. Door Will Have 10” Bottom Rail With Adam Rite Lock And Push / Pull Bars. Install Two Back To Back Horizontal Safety Guards On Each Door. All Glass Is To Be 1/4" Clear Tempered. Field Verify All Measurments And Door Swing Prior To Manufractoring And Installation. Pe Sealed Drawings And Product Approval Number To Be Included. Two (2) Store Front Style Interior Room Separations At Lecanto Primary Rooms 111 & 112. Reference Exhibit c And d. Two (2) Three-Bay Partitions Appox. 123 1/4" x 107 1/2", Each Having One 3'0" x 7'0" Door To Centered With Two Equal Sidelites. Sidelites Are To Have One Intermediate Horizontal Division At "Chair Rail" Height. Install a 2” x 5” x 1/8 Anodized Square Tube Under Drop Ceiling And Ancor At Each End. Framing Is To Be Anodized 1-3/4" x 4-1/2" Center-Set Flush Glaze For 1/4"Monolithic Infill. Doors Are To Be Anodized With Transom And Store Front Material In Finished Opening. Door Will Have 10” Bottom Rail With Adam Rite Lock And Push / Pull Bars. Install Two Back To Back Horizontal Safety Guards On Each Door. All Glass Is To Be 1/4" Clear Tempered. Field Verify All Measurments And Door Swing Prior To Manufractoring And Installation. Pe Sealed Drawings And Product Approval Number To Be Included.

Elementary School, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.