2022 Cold Milling of City Streets

The scope of work for this project shall consist of cold milling of City streets meeting the following specifications: 1.1. Cold mill to depth in inches as indicated on the bid section of this document or as directed by the Engineer. 1.2. Approximately 133,347 square yards of full width cold milling and curb reveal plus end joint milling. 1.3. Bid price to include all transportation costs to the locations shown on the Bid and Award pages. 1.4. Cold milling work shall be performed under traffic. No road closures will be allowed. The City will provide the necessary temporary traffic control and flagging for the cold milling operation. 1.5. Hand chipping and removal of material which is left due to the inability of the cold milling machine to work immediately adjacent to the face of curb, face of manholes, water valves and water boxes will be performed by the City. 1.6. Cleaning and sweeping of the cold milled pavement will be done by the City. 1.7. The bidder/contractor shall verify all measurements and shall be responsible for the correctness of same. Any difference which may be found shall be submitted to Anthony Ladd, PE, Public Works Division Assistant Director at (269) 337-8717 for consideration prior to beginning work with sufficient time to reach agreement on quantity of work to be completed. 1.8. The Contractor shall schedule all work to accommodate the City's schedule. In the event Contractor's schedule falls on weekends, nights or overtime work is required, no additional compensation will be allowed. 1.9. All work performed under this contract shall be in accordance with the 2020 Michigan Department of Transportation “Standard Specifications for Highway Construction”. 1.10. The Contractor shall guarantee all of his/her work for a period of one (1) year following the date of final acceptance of the completed work and shall repair, replace or make good any materials or work which shall fail to function or perform or be found defective, without costs to the City. 1.11. Payment will be based on the total project amount bid, for actual milling provided. The City reserves the right to add or delete locations. Additions or deletions less than 25% (by area) of the locations specified will not change the unit price. 1.12. Cold milling material removed must be disposed of by the Contractor.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 -	Utilities, Storm Drainage Utilities, Storm Drainage Structures.