Cedar Bay District II Pump Stations and Flow Rerouting Project - Robena Road

Furnish all labor, material, equipment and incidentals required and complete all work required by these Specifications, JEA’s Water and Sewer Standards Manual, January 2020 or latest version and as shown on the Drawings to provide the upgrades and rehabilitation at the Harts Road Wastewater Lift Station site. The following scope of work for this contract shall include but is not necessarily limited to, the following, all in accordance with the Contract Documents: 1.) Mobilization/Demobilization, General Requirements, Bonds and Insurance, Permitting, Project Controls, Testing, Record Drawings and As-Builts. 2.) Site Work a. Erosion and sedimentation control b. Clearing and Grubbing c. Site restoration including grassing, and other restoration d. Pavement mill and overlay as indicated on the Drawings e. Sidewalk installation and repair and replacement f. Landscaping and Irrigation 3.) Modifications and improvements to the existing wastewater pump station at Harts Road as specified herein, including but not limited to: a. Replacement of existing pumps with 90-horsepower dry-pit submersible horizontal Flygt pumps and associated piping, and valving appurtenances b. New detached elevated climate controlled precast electrical building with stair access and replacement of the below electrical components including but not limited to: 1) Motor controls centers (MCC), transfer switch, programmable logic controllers (PLC), human machine interface (HMI), controls, and communication equipment in kind c. Demolition of seal water system, and modifications to flushing water d. New 6-inch 316 stainless steel piping and flexible hosing for vac truck provisions e. Replacement of existing interior and exterior lighting with new LED fixtures f. Replacement of existing HVAC system capable of a minimum 12 air changes per hour (ACH) g. New aluminum stair access for existing floor opening 4.) Operational and maintenance manuals for all new equipment 5.) Equipment and services for acceptance testing 6.) Review of equipment installation 7.) Warranties and bonds 8.) All testing required during construction and startup 9.) All instrumentation and electrical components including but not limited to: conduit, wire, electric motors, control panels, variable frequency drives, motor control centers, and field instruments 10.) Permits listed below: a. FDEP and COJ Specific Permit to Construct the Pump Station Improvements. b. FDEP ERP Stormwater. c. SJRWMD Dewatering Permit if required, will be obtained by the Contractor. d. COJ 10-Set Review (Building / Zoning / Stormwater Management / Erosion Control Traffic / Landscape). e. National Pollutant Discharge Elimination System (NPDES) General Permit for Stormwater Discharges from a Construction Site Notice of Intent (NOI) – Contract documents will specify that the NPDES obtained by the Contractor. 11.) All other work in these contract documents not covered by the items listed above.

Lift and Pump Stations, Renovation.

Division 03 -	Concrete.
Division 04 -	Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection.
Division 08 -	Openings.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Toilet, Bath, and Laundry Accessories, Fire Protection Specialties, Fire Extinguishers, Storage Specialties.
Division 11 -	Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC).
Division 26 -	Electrical.
Division 27 -	Communications, Data Communications, Voice Communications, Audio-Video Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork.
Division 32 -	Exterior Improvements, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains.
Division 40 -	Process Integration, Water Process Piping.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.