Similar Projects
| Reported | 09/14/2019 12:00 AM |
| Project Title | 44--Annual Inspections on Boilers High Pressure & Condensing |
| Physical Address | View project details and contacts |
| City, State (County) | Phoenix, AZ 44ANNUAL (Maricopa County) |
| Category(s) | Professional Services |
| Sub-Category(s) | Inspection Services |
| Contracting Method | Competitive Bids. |
| Project Status | Request for Quotations |
| Bids Due | View project details and contacts |
| Estimated Value | |
| Plans Available from | Federal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | Background: Annual inspection is required on both high-pressure steam boilers and all hot water condensing boilers. These inspections are required to be completed by a manufacture trained service representative. These boilers are located in a number of different building and requires coordination to set the necessary time to complete the inspections without interfering with patient needs. The technicians will be responsible to know from the manufacturer with scheduled annual is due according to the date of install. Scope of Work / Technical Requirements: 200 hp Nebraska High Pressure Steam Boiler To open fireside and waterside on #1 boiler. To washout any loose debris from the waterside. To brush out any loose debris from the fireside. To close both waterside and firesides of the boiler with new gaskets. To fill the boiler and test fire. During the firing of the boiler, we will check combustion and adjust as necessary. If the boiler is heavily scaled or sooted or if additional work is needed, an additional quote will be given. Scope of Work / Technical Requirements: 400 hp Clever Brooks High Pressure Steam Boiler Open fireside and waterside on #1 boiler. Washout any loose debris from the waterside. Brush out any loose debris from the fireside. Close both waterside and firesides of the boiler with new gaskets. Fill the boiler and test fire units. During the firing of the boiler, we will check combustion and adjust as necessary. If the boiler is heavily scaled or sooted or if additional work is needed, an additional quote will be given. Scope of Work / Technical Requirements: Knight low pressure condensing boilers Open fireside and waterside on (2) Knight Boilers. Washout any loose debris from the waterside. Brush out any loose debris from the fireside. Close both waterside and firesides of the boiler with new gaskets. Fill the boilers and test fire. During the firing of the boiler, technician will check combustion and adjust as necessary. Scope of Work / Technical Requirements: Laars low pressure condensing boilers Open fireside and waterside on (2) Laars Boilers. Washout any loose debris from the waterside. Brush out any loose debris from the fireside. Close both waterside and fireside of the boiler with new gaskets. Fill both boilers and test fire units. During the firing of the boiler, technician will check combustion and adjust as necessary. Scope of Work / Technical Requirements: AERCOS Benchmark low pressure condensing boilers Complete the annual maintenance on (4) AERCOS Benchmark Boilers Brush tubes and wash out loose debris | ||
| Details |
|
||
| Bidder's List | View project details and contacts | ||
| Prospective Bidders | View project details and contacts | ||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
