Similar Projects
Reported | 04/24/2019 12:00 AM |
Project Title | Plant Mix Wearing Course Overlay |
Physical Address | View project details and contacts |
City, State (County) | Santa Fe, NM (Santa Fe County) |
Category(s) | Heavy and Highway |
Sub-Category(s) | Paving/Reconstruction |
Contracting Method | Competitive Bids. |
Project Status | Bidding |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | Municipal Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | This work shall consist of a one-pass paving process that applies a Polymer Modified Emulsion(PME) followed immediately with a quality gap-graded hot mix wearing course. The PME shall be sprayed immediately prior to the application of the wearing course so that no part of the machine disturbs or affects the emulsion membrane. The process of spreading the emulsion membrane, spreading the wearing course, and screed seating shall be performed in less than ive (5) seconds to ensure a homogeneous and high quality surface that can be opened to traffic immediately upon sufficient cooling. The design yields for Type B (3/8 inch) hot mix wearing course shall be sixty (60) pounds per square yard, and the Type C (1/2 inch) hot mix wearing course shall Ninety (90) pounds per square yard. The actual yield shall be within plus or minus five (5) pounds of the design yield. Actual yields over this tolerance will not be paid for. While actual yields under this tolerance shall be corrected by the Contractor at the Contractor's expense. | ||||||
Details |
|
||||||
Bidder's List | View project details and contacts | ||||||
Prospective Bidders | View project details and contacts | ||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |