Similar Projects
Reported | 06/20/2020 12:00 AM |
Project Title | Niagara Falls ARS |
Physical Address | View project details and contacts |
City, State (County) | Niagara Falls, NY (Niagara County) |
Category(s) | Sewer and Water |
Sub-Category(s) | Fuel/Chemical Tanks and Lines |
Contracting Method | Competitive Bids. |
Project Status | Accepting Letters of Interest |
Bids Due | View project details and contacts |
Estimated Value | $10,000,000 to $25,000,000 |
Plans Available from | Federal Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Project Description: Replace the damaged and non-compliant components of the former 107 ANG aircraft fuel system including the pumphouse, controls, operating storage, distribution lines, existing fuel pits, existing fuel service line, and replacing existing jet-fuel transfer line. By doing so, the aircraft refueling system can become operational, commensurate with the demands of the 914 ARW KC-135 mission. All components, including distribution lines, must meet current New York environmental requirements. a. P2 488039- Repair/Replace Fuel Bulk Storage Transfer Line: Replace approximately 5,725 LF of aircraft fuel transfer line, including cathodic protection, between 914 ARW and former 107 ANG bulk storage areas. Existing 6” carbon steel piping, including 8” fiberglass containment pipe, will be removed completely and replaced with 8” carbon steel piping. Replace low point drains and thermal relief valves between bulk storage area and pumphouse. b. P2 Number 488040- Pumphouse and distribution line: Replace approximately 1,850 LF of aircraft fuel distribution line (850 LF above ground), including cathodic protection, between former 107 ANG bulk storage areas and apron isolation valve pit. Existing underground 10’’ carbon steel piping and above ground 10’’ stainless steel distribution lines will be removed completely and replaced. Replace/install new low point drains and thermal relief valves, replace product recovery tank. c. P2 488041 Repair Aircraft refueling pits/service lines- Provide a serviceable, defect-free fuel service line, valves and low point drains between the apron isolation valve pit and hydrant refueling pits is imperative to provide necessary hydrant refueling capability for KC-135 operations Replace approximately 1,500 LF of aircraft fuel service line, including cathodic protection, between apron isolation valve pit and the five refueling pits. Existing 10” carbon steel piping, including 12” fiberglass containment pipe, will be removed completely and replaced with 10” carbon steel piping. Repair concrete pavement in-kind. Provide 3rd party certified tightness testing/leak detection system for loop system. Replace low point drain pit/piping/concrete walls adjacent to hydrant pits. Replace/install new low point drains and thermal relief valves between apron isolation valve pit and five refueling pits. Install new hydrant control valves and water draw-off pipes in the hydrant/isolation valve pits. Remove and replace existing fuel pits (5 ea). Refueling pits need to be upgraded to support KC-135 operations and spaced to accommodate required clearances. Hydrant refueling system must meet current New York environmental requirements including leak monitoring |
||||||||||||||
Details |
|
||||||||||||||
Bidder's List | View project details and contacts | ||||||||||||||
Prospective Bidders | View project details and contacts | ||||||||||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |