Last Updated 06/14/2019 08:14 AM
Project Title

Grease Trap Cleaning

Physical Address View project details and contacts
City, State (County) Cheektowaga, Tonawanda, West Seneca, NY 14224   (Erie County)
Category(s) Sewer and Water
Sub-Category(s) Sanitary Sewers
Contracting Method Competitive Bids.
Project Status Results
Bids Due View project details and contacts
Estimated Value
Plans Available from
Owner View project details and contacts
Architect View project details and contacts
Description Potter Career & Technical Center, 705 Potter Road, West Seneca, New York 14224 - Contact: Head Custodian, Nick Notaro (716) 574-3456 Harkness Career & Technical Center, 99 Aero Drive, Cheektowaga, New York 14225 - Contact: Head Custodian, Joe Roetzer (716) 472-0755 Kenton Career & Technical Center, 151 Two Mile Creek Road, Tonawanda, New York 14150 - Contact: Head Custodian, Andrew Harhigh (716) 574-5996 Education Campus, 355 Harlem Road, West Seneca, New York 14224 - Contact: Head Custodian, Rick Wacienga (716) 289-5186 Scraping down the sides of the trap with the appropriate equipment. Washing out trap with high-pressure hose and clean water, BACK WASHING IS NOT ACCEPTABLE. Pumping must remove all waste leaving the trap as clean and dry as possible. Remove all foreign materials found in the trap. Hauling away waste must be done in an approved truck. Disposal and treatment of waste shall be conformed to Federal, State, County and City laws and ordinances and a chain of custody scrupulously maintained. Grease trap shall be completely pumped (i.e. – dry-pumped removing the grease mat, liquids, sludge and wash down material from the interior walls). Report any problems/damage with the interceptor/trap to the Head Custodian at the Career & Technical Center or Education Campus(i.e. – missing or broken baffles, screens and pipes). Bacterial products used in the maintenance of traps must be pre-approved by Erie 1 BOCES. Products having a content of enzymes, surfactants or solvents that is greater than 10% of the volume will not be approved for use. Cleaning shall include the complete removal of all contents, including floating materials, wastewater, and bottom sludge and solids. Open grease trap lids, put vacuum hose in trap, pump trap until empty, scrape walls and rinse-down, re-pump; and put lids back. Hydro jet lines – Clean out drain lines from kitchen to main sewer line. Head Custodian will provide direction during pre-bid inspection.
Details
Division 46 - Water and Wastewater Equipment, Oil and Grease Separation and Removal Equipment, Grease Traps.
Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents