NAVFAC SW - Design/Build MALS-13 3D Printer Manufacturing Facility

This Design/Build seed project consists of modifying an existing space within Building #230 for the future installation of a Government supplied 3D Printer StratasysF900. The 3D printer, moisture and solids analyzer, along with the Vacuum Oven will be provided and installed by the Owner (MALS-13). The project duration is 180 days total, including design. The Buy American requirement along with this project being Prevailing Wage. SSPC QP1 Certification is required for Painting/Coatings. Roofing maybe required depending on HVAC equipment chosen. Amendments #4-6 are applicable to this project. Trades required: Construction Photography, Utility Locating, Final Cleaning, Demolition, Concrete, CMU Masonry, Roofing, Hollow Metal Doors, Overhead Doors, Door Hardware, Drywall & Framing, Resilient Flooring, Painting, Signage, Fire Extinguishers & Cabinets, Plumbing, HVAC, DDC Controls, Testing/Adjusting & Balancing and Electrical. The Range of Magnitude - Between $250,000 and $500,000 Marine Corps Air Station (MCAS) Yuma, Arizona is a military airport serving joint military, commercial, and general aviation facility uses. The purpose of this design build (DB) construction project is to develop a process to modify an existing space to provide support for a suitable conditioned environment for a 3D Printer manufacturing facility. Provide and install the necessary Architectural, HVAC related Mechanical, Electrical equipment in the designated area within the confines of Building 230 on the Marine Corps Air Station Base, Yuma, AZ. Improvements include the construction of a safe environment for the future installation of a new Government Provided 3D Printer StratasysF900 which include: Connect equipment to a grounded facility power source. Do not defeat of bypass the ground lead. Identify and label equipment branch circuit interrupters or circuit breakers. Provide a formal instruction to the end user on how to turn them on and off in case of an emergency. Due to the sensitivity of the 3D Printer, the room shall maintain the recommended range of temperature and humidity at all times. All inquiries/Requests for Information (RFI) concerning any part of this solicitation shall be made to Mr. Billie Crockett at billie.p.crockett.civ@us.navy.mil or (619) 705-4674.

Division 03 -	Concrete, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Insulation, Weather Barriers.
Division 08 -	Openings, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Entrances and Storefronts, Curtain Wall and Glazed Assemblies, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Acoustical Ceilings, Flooring, Resilient Flooring, Carpeting, Acoustic Treatment, Painting.
Division 10 -	Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Partitions, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies, Flagpoles.
Division 12 -	Furnishings, Window Treatments, Casework, Office Furniture, Multiple Seating.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems.
Division 22 -	Plumbing, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Planting Irrigation, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.