Remodeling and Repairs at 4464 North 51st Street Boulevard

1 Tree Trimming: Cut back the branches to the main large branches, which are within 10' of the roof and house. Remove and dispose of the waste. 2 Roof Replacement: Tear off all layers of existing shingles and replace the entire roof. Replace any underlying rotten or damaged roof sheathing, and install 7/16" OSB sheathing over the entire deck. Install 'W' flashing at all valleys. Provide ice and water shield a minimum of 3 feet wide at all roof edges, and valleys, install synthetic roofing felts, and metal drip and apron flashing. Install new roof vents per code. Provide all necessary flashings, and minimum 30 year dimensional shingles. 3 Soffit and Fascia Repairs: Repair or replace all damaged fascia and soffit metal covers at the North roof edge. Re-secure loose covers. Repair any rodent holes at roof edges, and secure with sealed metal flashing. 4 Retain and Protect Gutters and Downspouts: Repair any damaged caused by construction, and clean the gutters at the end of the project. 5 Alarms: Install a combination smoke/CO alarm in the basement, first floor, second floor. All alarms shall be sealed battery, 10 year lithium ion units. 6 Stair Handrails: A.) Securely re-install all loose existing handrails between the first and second floors. B.) Install new handrail at all flights of stairs to the basement. 7 Dryer Vents: Replace both of the flexible dryer vents with solid-walled galvanized vent pipes. 8 Electrical Panel: One of the electrical panels has an opend circuit space, install a metal cover over this space. Miscellaneous: The contractor is responsible to field verify all measurements, the amount of materials needed, and the number of windows in the building. If any item in this scope calls for a certain manufacturer, model number, or approved equivalent of a particular item, and that item is to be substituted, both NIDC and the owner must approve the substitution in writing as a part of the contract.Both the "Rehabilitation and Technical Specifications and Performance Standard for the City of Milwaukee - February, 2006" and the "NIDC Addendum to Specifications," dated 8/23/07 & 5/13/08, are incorporated into this scope by reference. These items provide an outline of materials requirements & performance expectations. Updated copies can be obtained from NIDC @ 809 N Broadway-3rd Flr.Lead Related Work: Any task that a disturbs previously painted surface shall be performed by properly certified personnel and follow the State of Wisconsin Department of Health Services Administrative Code Chapter DHS 163 regarding the certification for the identification, removal and reduction of lead-based paint hazards (Pb).And, if applicable: Any task that disturbs a previously painted surface requires Milwaukee Health Department notification (Pb-N). Window replacement shall be performed by properly certified personnel and requires a Milwaukee Health Department Permit (Pb-A). 9 Deadbolts: Replace the double keyed deadbolts at the first floor entries with thumb turn deadbolts. 10 Electrical Covers: A.) Tuck the existing wiring back into the open electrical junction box, located in the South half of the attic area. Install a cover plate. B.) Install an outlet cover over the open electrical outlet, attached to a roof joist.

Single-Family Homes, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.