L and N 11th Floor Stabilization and Security

Phase 1: 3rd Floor – Work will include a change of layout on the East side of the 3rd floor. The scope of work on this floor will begin with the removal of existing cubicles, furniture, and power poles. Two new walls will be constructed in order to create a conference room and office area. Power and data will be installed to supply the new spaces. Furniture from the East side of the 11th floor will be moved to the new area on the 3rd floor and arranged to match the existing configuration on 11. Phase 2: 11th Floor - Demolish and renovate the sub-floors at Floor 11 of the building. Remaining existing interior cubicle walls, free-standing furniture, and equipment will be removed and stored in the building’s basement or storage pods. Existing wall base will be removed as part of the demolition. Doors will be removed and stored in the building’s basement or storage pods. The existing floor finishes, gypsum cement underlayment, sandwiched VCT, marble, and wood sub-floor will be removed down to the top of the existing wood sleepers / concrete cinders. This depth may vary depending on the location in the building. The sub-floor will then be built back to a consistent elevation using a combination of high-density rigid insulation and gypsum cement topping. New floor finishes will be provided, while existing doors and other items previously located will be built-back into the same configurations as prior to the construction.

Division 09 -

Finishes, Flooring.