ADPH Various Health Department Improvements

The general scope of the work includes, but is not limited to, the materials and installation of aluminum canopy systems and interior renovations. Aluminum canopies will include concrete, aluminum canopy structures, pipe bollards, electrical, minor landscaping and other miscellaneous work. The interior renovations will include new construction for single use restrooms, conversation of storage space into office use, acoustical ceiling renovations, electrical, mechanical, plumbing, flooring, painting/wall coverings, and miscellaneous other work. Prequalification is required for this project. Only General Contractors who have been approved to bid pursuant to the pre-qualification procedures and criteria established by the Owner, will be eligible to bid the Project. The pre-qualification procedure is intended to identify responsible and competent bidders relative to the requirements of the Project. The Owner reserves the right to waive technical errors in applications or abandon the pre-qualification process. Pre-qualification proposal package requirements may be obtained from the office of Robins & Morton. General Contractors who were previously pre-qualified are still pre-qualified and do not have to resubmit a new submittal. TTL Project No. 000210103323.00 It will be dependent upon the individual contractors to plan those individual trips. Entry into the buildings will have to be planned in advance with the owner and can be coordinated at the Pre-Bid Conference. A cashier's check or bid bond payable to Alabama Public Health Care Authority in an amount not less than five (5%) percent of the amount of the bid, but in no event more than $10,000, must accompany the bidder's proposal. Performance and Payment Bonds and evidence of insurance required in the bid documents will be required at the signing of the Contract. Subsequent Addenda will only be provided to those who attend the pre-bid conference unless otherwise requested. Bids must be submitted on the proposal form furnished by the Architect or copies thereof. Bid proposals mailed prior to the due date may be modified via email until close of business on the proposal due date. The Owner reserves the right to reject any or all proposals and to waive technical errors if, in the Owner's judgment, the best interests of the Owner will thereby be promoted. All questions referring to the actual Bid Documents shall only be submitted by email to the Architect's representative. Bidders shall contact Ellis Architects for the email address for submitting questions and/or requesting clarifications. All questions or correspondence to the Owner shall be submitted to the Owner's Program Manager. Architect: Ellis Architects, Inc. 1490 Northbank Parkway, Suite 212 Tuscaloosa, Alabama 35406 (205)752-4420 Program Manager: Attn: Kaylor McCain Robins & Morton 400 Shades Creek Parkway Birmingham, Alabama 35209 Kaylor.Mccain@robinsmorton.com (205) 870-1000

Division 03 -	Concrete, Concrete Forming and Accessories, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Millwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Metal Doors and Frames, Wood Doors, Entrances and Storefronts, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Acoustical Ceilings, Resilient Flooring, Wall Coverings, Painting.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet Compartments, Emergency Aid Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Lockers, Storage Assemblies, Metal Storage Shelving, Wardrobe and Closet Specialties, Closet and Utility Shelving.
Division 11 -	Equipment, Healthcare Equipment, Medical Sterilizing Equipment, Examination and Treatment Equipment, Patient Care Equipment, Collection and Disposal Equipment.
Division 12 -	Furnishings, Art, Window Treatments, Casework, Furnishings and Accessories, Seating.
Division 13 -	Special Construction, Radiation Protection.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Healthcare Plumbing Fixtures, Drinking Fountains and Water Coolers, Compressed-Air Systems for Laboratory and Healthcare Facilities, Vacuum Systems for Laboratory and Healthcare Facilities, Gas Systems for Laboratory and Healthcare Facilities, Chemical-Waste Systems for Laboratory and Healthcare Facilities, Processed Water Systems for Laboratory and Healthcare Facilities.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.
Division 25 -	Integrated Automation, Integrated Automation Network Equipment.
Division 26 -	Electrical, Power Distribution Units, Battery Equipment, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Special Purpose Lighting, Healthcare Lighting, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Call Management, Healthcare Communications and Monitoring Systems.
Division 31 -	Earthwork, Site Clearing, Grading, Excavation and Fill, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Pavement Markings, Fences and Gates, Planting Irrigation, Planting.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities.