Multizone Unit Replacement Phase I

Scope of Work: 1. The installation covers the furnishing and installing coils, piping systems, and all necessary trim and specialties, etc., as specified and shown on drawings or as required to provide the complete heating and air conditioning systems shown on the drawings and specified herein. 2. A complete and ample system of heating water and chilled water piping shall be installed as shown on the plans. 3. Piping shall be properly graded and supported to prevent water and air pockets from forming, and to insure noiseless circulation throughout the system. 4. Branches leading from the mains shall be taken off from the top or sides of the mains at 90 deg., except where otherwise directed. These branches shall be arranged with swing connections to accommodate expansion and contraction. 5. All mains reducing in size shall be reduced with eccentric reducing fittings, with top of pipe level for water. 6. Run all piping as high as possible. 7. All heating water and chilled water piping above 2” shall be welded.

Division 23 -

Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Central HVAC Equipment.