Similar Projects
Paving
Bidding
Skowhegan, ME

Striping Trucks - Electronic Pavement Marking Systems Maintenance and Repair/Statewide
Post-Bid

2019 Road Paving Program
Post-Bid
Pittsfield, ME

US Route 2 By-Pass Lane Extension
Results
Skowhegan, ME

Paving Projects
Results
Skowhegan, ME

Rockwood Paving Project - Multiple Roads
Post-Bid
Rockwood, ME

Pavement Milling, Ultra-Thin Bonded Wearing Course Overlay with Drainage and Safety Improvements
Results
Less than $3,730,000 est. value
Fairfield, Norridgewock, Skowhegan, ME

Hot Mix Asphalt Overlay with Safety Improvements
Results
Canaan, Pittsfield, ME

Mercer, Norridgewock, Farmington and Strong - Region 3
Results
Farmington, Mercer, Norridgewock, Strong, ME

Paving
Results
Fairfield, ME

Reclaim
Results
Fairfield, ME

On Call Maintenance Paving
Results

Crack Sealing
Results
Dexter, Newport, Old Town, Orono, Palmyra, Parkman, Pittsfield, Veazie, ME

Cemetery Road
Results
Skowhegan, ME

2019 Parkman Hill Road Repair
Results
Skowhegan, ME

Last Updated 04/17/2019 10:22 AM
Project Title

Lake Moxie Road in the Forks Plantation and Moxie Gore Township

Physical Address View project details and contacts
City, State (County) West Forks, ME   (Somerset County)
Category(s) Heavy and Highway
Sub-Category(s) Paving/Reconstruction
Contracting Method Competitive Bids.
Project Status Results
Bids Due View project details and contacts
Estimated Value
Plans Available from
Owner View project details and contacts
Architect View project details and contacts
Description The entire length will be approximately 5.5 miles. 1. Beginning at the intersection of Rt 201 and the Lake Moxie Rd. provide and properly place 9.5 mm hot mix asphalt shim material 16,368 feet in length, 20 feet in width an average of V* of an inch in depth to restore the proper 2% cross slope and crown of the existing surface. (Approximately 1,490 tons) 2. Beginning at the intersection of Rt. 201 and the Lake Moxie Road, provide and properly place 12.5 mm hot mix asphalt 29,040 feet in length, 20 feet in width and 1)4 inches in depth at a 2% cross slope. (Approximately 5,314 tons) 3. All hot mix asphalt placement shall follow the MOOT standard specification (November 2014 edition. Section 401 Hot Mix Pavement) The contractor shall provide the mix design for the shim and surface material with their bid. The contractor shall also provide truck weight slips to Somerset County and The Forks Plantation. 4. All shoulders shall be brought up to the pavement approximately 3 feet in width at a VA to 1 slope. (Approximately 1050 cu yds.) 5. All gravel driveways and intersections shall be brought up to the pavement elevation for a smooth transition with the road surface. 6. All paved driveways and intersections shall be brought up to the pavement elevation with 12.5 mm surface hot mix asphalt creating a smooth transition with the road surface. 7. Any additional (incidental) work approved by The Forks Pit. or Somerset County shall be done on a time and material basis. 8. The contractor shall Dig-Safe the project, clean and slope all ditches so as to provide proper drainage off, out of and away from the road.
Details
Division 01 - General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 32 - Exterior Improvements, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Paving Specialties, Pavement Markings.
Division 33 - Utilities, Storm Drainage Utilities, Storm Drainage Structures.
Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents