Cullinan Park Pedestrian Bridge Abutments

Construction of reinforced concrete abutments for two (2) pedestrian bridges, 120 feet long by 10 feet wide each, at Cullinan Park in Sugarland, Texas. Install the two (2) pre-fabricated structural steel pedestrian bridges with concrete surface, on the reinforced concrete abutments and over the water channel. GCWA will provide the two (2) pre-engineered structural steel bridges for the contractor to install. The contractor will provide and install the concrete for the two (2) bridge surfaces. Install rip rap on all four (4) sides of the bridges as per the plans and specifications. The project will take place on park grounds with limited accessibility. The Contractor must perform the work with minimal impact on the park visitors.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.