Installation and/or Removal of Ground Mounted and Overhead Signs and Structures on an as Needed Basis

1 Reinforced Concrete Footings (Includes Drilling Hole, SettingRebar And Bracing Steel)Removal Of Existing Wood/U-ChannelPosts Is Incidental.30 Ea 2 Non-Reinforced Concrete Footings (Includes Drilling Hole AndBracing Steel). Removal Of Existing Wood/U-Channel Posts IsIncidental.30 Each 3 Class “A” Concrete 30 Cy 4 Type “A” Sign Erection 50 Ea 5 Type “B” Sign Erection 60 Ea 6 Type “D”, “E” And “F” Sign Erection 25 Ea 7Replace Top Section Only On Existing Steel Supports (Removal OfExisting Top Sections Is Incidental) 20 Ea 8 Attach Logo Panel To Mainline Sign 50 Ea 9 Attach Logo Panel To Ramp Sign 50 Ea 10 Remove Logo From Mainline Sign 50 Ea 11 Remove Logo From Ramp Sign 50 Ea 12 Remove Ground Mounted Sign 30 Ea 13 Remove Footing 50 Ea 14 Remove Wooden Support 20 Ea 15 Remove U-Channel Support 10 Ea 16 Remove Steel Beam Support 20 Ea 17 Reattach Existing Steel Beam To Existing Footer (Where Removal IsNot Required) 30 Ea 18 Install Overlay On Ground Mounted Sign 15 Ea 19 Install Overlay On Overhead Sign 15 Ea 20 Clearing For Sight Distance 50 Ea 21 Remove Type “A” Overhead Sign 50 Ea 22 Remove Type “B” Overhead Sign 50 Ea 23 Install Type “A” Overhead Sign 50 Ea 24 Install Type “B” Overhead Sign 50 Ea 25 Remove Lighting Structure On Overhead Sign (Per Structure) 25 Ea 26 Removal Of Catwalk From Overhead Structure (Includes VerticalBracing) 25 Ea 27 Install New Anchor Bolt Into Existing Cantilever Or Overhead SignFooting 5 Ea 28 Install U-Channel Support 50 Ea 29 Install Wooden Support 50 Ea 30 Repair Existing Footer 10 Ea 31 Install New Steel On Existing Footer 20 Ea

Division 10 -

Specialties, Signage.